User's Manual

1 8
Press [OK] to confirm . “DEREGISTERING…” will be
displayed during the process. W hen deregistration
process is com pleted, the unit will return to Registration
m enu.
“HS_ _” will be shown after the handset return to standby.
CHOOSE THE DIALING M ODE
If your telephone is equipped with a touchtone dialing system , the phone will be ready to
use as soon as the battery is charged. If your line uses pulse (rotary) dialing, you will
need to set the dialing m ode as follows:
Press [M ENU] and “REGISTRATION” appears on the
display.
Using [▼ ] / [▲ ] to access “DIAL M ODE”.
Press [OK] to enter Dial m ode m enu.
Using [▼ ] / [▲ ] to select “PULSE MODE”.
Press [SAVE] to confirm .
The display will return to “DIAL MODE”, press [EXIT] to
return to standby.
You are now ready to use your new telephone
REGISTRATION 
NAME HANDSET
DIAL MODE

O.K. EXIT
REGISTRATION 
RINGER & BEEP
USE / =REVIEW

O.K. EXIT
WALKIE-TALKIE v
NAME HANDSET
DIAL MODE

O.K. EXIT
TONE v
PULSE
USE SAVE = DONE

EXIT
MESSAGES
HS (2)
10:08AM 01/15

SAVE SERVICE MENU DIR. DIAL V.M.
SAVE
G ET T IN G STAR T E D