User's Manual

16
AC POW ER
Caution:
1. Use ONLY with the supplied AC Adaptor (AC 120V, DC7.5V, 500m A).
2. Plug the adaptor to an electrical outlet that is near the equipm ent and is easily
access ible.
3. The AC adaptor m us t rem ain connected at all tim es (It is norm al for the adaptor to
be warm during use).
4. Do not rem ove the battery from the hands et to charge it. Do not dispos e of
batteries in a fire. They m ay explode. Check with local codes for possible special
dis posal instructions.
5. Do not rem ove or dam age the battery cas ing.
6. If you do not expect to use your phone for a m onth or longer, rem ove the batteries .
Batteries can leak chem icals that can destroy electronic parts .
7. For the longes t battery life and optim al operation of the phone s ystem ALW AYS
com pletely charge and dis charge the batteries.
CONNECTING THE BASE UNIT
1. Plug one end of the telephone line cord into the jack at the bottom of the base unit
and plug the other end of the cord into the m odular telephone wall jack.
2. Plug the AC adapter into the 7.5V DC jack on the base and the other end into a
standard 120V AC wall outlet.
3. Set the base unit on a tabletop and then place the handset on the base unit.
Note:
1. Use only the AC adaptor supplied.
2. Connect the AC adaptor to a continuous power outlet.
3. Place the base unit clos e to the AC outlet so that you can unplug the AC adaptor
easily.
Tip:
If your telephone outlet is not m odular, contact your telephone com pany for assis tance.
REGISTRATION & DE-REGISTRATION OF HANDSET
The first registered hands et will be autom atically assigned as HS (1). W hen additional
handsets are registered to the s ystem , they will be ass igned extension num bers in the
following s equence: HS (2), HS (3) and HS (4). They can be renam ed later.
Registration
An unregis tered handset will dis play “HS_ _”.
NO NEW CALLS
HS_ _
12:00AM 01/01

SAVE SERVICE MENU DIR. DIAL V.M.
G ET T IN G STAR T ED