User's Manual

SENDING TONE SIGNALS IN PULSE DIALING MODE

If your telephone line uses pulse dialing (such as for a rotary dial phone), you can

tem porarily override the Pulse Mode setting with the Tone Mode until the unit goes

back on-hook. This m ay be necessary to access certain special services such as

bank-by-phone services:

1. Use pulse dialing to call the service.

2. W hen the service answers, press [].

3. Follow the norm al procedure for the special service you are using. Any additional

num bers you dial are sent as tone signals.

4. W hen you hang up, the telephone returns to pulse mode.

Note: The tem porary tone can be saved in m em ory and can be executed in norm al

dialing, redialing or Directory dialing.

DIAL VOICE MAIL

If you have subscribed to the Voice Mail and Message W aiting Indicator services, you

can access your voice m ail system by pressing [DIAL V.M.]. To use this feature, you

m ust first program your voicem ail access num ber (your telephone number) into the

handset and base unit.

Program your own Voicem ail access num ber

Press the softkey [DIAL V.M.].

Press the softkey [EDIT], you will then be prom pted to

“ENTER NUMBER :”.

Enter your telephone num ber. If you m ake a m istake,

press [DELETE] to erase the last digit and re-enter.

Press [SAVE] to confirm program m ing.

You are now ready to use the Dial voicem ail key.

Using DIAL V.M. softkey

Press the softkey [DIAL V.M.]. Your 7-digit access

num ber will be displayed.

DIAL VOICE MAIL

-----------

EDIT EXIT

ENTER NUMBER:

1234567_

EXIT DELETE

SAVE

DIAL VOICE MAIL

1234567

EDIT EXIT

AD VAN C E D O P E R AT IO N