User's Manual

2 3
PBX Mode
If you us e an in-house phone s ystem , you m ay have to dial an external access code
before placing an outgoing call. Follow the steps below and enter that code in the PBX
PREFIX field. This code will then be added to all s tored num bers when dialing out.
Press [MENU].
Using [▼] or [▲ ] to select “PBX MODE”.
Press [O.K.] to enter into the selection.
Using [▼] or [▲ ] to enter a digit number for outgoing
calls .
Press [SAVE] to confirm , and then press [EXIT] to
return.
Note: The phone will autom atically screen all Pre-dial numbers prior to dialing out if
PBX Prefi x is set. Enter the access code and the phone number you wish to dial, the
phone will autom atically insert a ‘paus e’ after the first digit when dialing out the number.
On the contrary, if the firs t digit is not the access code, the sys tem will classify it as an
internal call and dial out the displayed number only.
New Call Lam p
Press [MENU].
Using [▼] or [▲ ] to select “NEW CL LAMP”.
Press [O.K.] to enter into the selection.
Using [▼ ] or [▲ ] to turn the New Call Lamp ON or OFF.
Press [SAVE] to confirm , and then press [EXIT] to
return.
PBX MODE 
O.K. EXIT
PBX PREFIX:_ 
EXIT
SAVE
NEW CL LAMP 
O.K. EXIT
NEW CL LAMP IS OFF 
EXIT
SAVE
ME N U S E T T IN G S