User's Manual

TIPS: Power Adaptor, etc.
¾ Use the AC Power adaptor provided with your Cell2Tel or you may damage your unit.
¾ IF the home phone connected to your Cell2Tel does not ring: check the green Power indicator is
turned ON. IF not, unplug and re-plug the AC power adaptor again. Also check the telephone cord
is properly plugged into the PHONE jack.
¾ Cell2Tel should work with ALL telephones, including analog telephones with DTMF dialing.
Fig. 2.
TIP: Hanging Cover
¾ Move hanging cover to left & plug telephone cord into the TEL. LINE jack
After installation is completed, confirm connections by checking the lighting LEDs.
IF the red LED indicator
is lit, you need to check and place the telephone cord for the
TEL. LINE into the correct connection.
1. Green LED light (Power ON, or Incoming Ring from Landline)
z ON - indicates Cell2Tel is powered
z Blinking - indicates an incoming call from your landline
2. Red LED light (Landline Connection Error Indicator)
z ON - indicates a connection error which tells you the landline is mistakenly connected
to the PHONE jack instead of the TEL.LINE jack; Reconcile the landline connection
with the TEL.LINE and PHONE jacks.
8