User's Manual

Installation & Set Up
Choosing the best Location
Cell phone calls are transmitted between the Cell2Tel and the paired & connected cell phones
by using a wireless Bluetooth signal. For the best performance and operation, here are some
important guidelines you should consider:
• The Cell2Tel should be placed as in the area with the best cell phone signal reception.
• The Cell2Tel should be located close to both a phone jack if used with a home line and a
continuous power outlet that is not switch-controlled.
• For best Bluetooth signal reception you are recommended to have no more than 10’ (3m)
between your cell phone(s) and the Cell2Tel
• If the connected home phone is a cordless telephone phone system supporting multiple
handsets, you may talk using any of the expandable handset on either a landline or a
cell phone connected call.
TIP: While using Cell2Tel…
¾ A number of home/office wireless appliances operate at 2.4GHz Radio Frequency that may cause
interference to the cell phone or Cell2Tell reception. Examples include 2.4GHz cordless phone
systems, Wi-Fi, wireless networks operated at 802.11 spec., and microwave ovens. Move away
from these wireless appliances for the best Cell phone and/or Bluetooth Signal reception.
Set Up & Diagrams Refer to Fig. 1. & Fig. 2. for installation diagrams
1. Connect the telephone line cord of your current home phone to the Cell2Tel PHONE jack
2. If you want the Cell2Tell to work with your landline as well, connect the line cord to the
TEL. LINE jack and a modular telephone jack (RJ11C) at wall
3. Plug the AC power adaptor into an electrical outlet and connect to Cell2Tel’s power jack
The ‘Power’ indicator
turns ON when the power adaptor is connected properly
Fig. 1.
7