User's Manual

22
Do not attempt to repair or modify this equipment. Changes or modifications not expressly
approved by the party responsible for its compliance could void the user’s authority to operate
the equipment and any terms of warranty.
This unit should not be used on coin telephone lines. Connection to party line services is
subject to state tariffs. If trouble is experienced with this unit, disconnect this unit from the
telephone line to determine cause for any malfunction. If the unit is confirmed to be
malfunctioning, use should be discontinued until the issue has been appropriately corrected.
Current FCC regulations specify that any direct connections to a telephone company line shall
use only standard phone jacks USOC RJ11C and plugs that are TIA-968-A compliant.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.
CAUTION To maintain compliance with the FCC’s RF exposure guidelines, please place the
unit at least 20 cm away from persons nearby.
ETL US mark should comply with UL60950-1 First Edition;
CETL mark should with CAN/CSA-C22.2 No. 60950-1-03 First Edition.