User's Manual

13
Make an outgoing call over your Cell Phone
You need to select the desired cell phone. Press [1] followed by [Flash] on your home
phone to select Cell Phone 1, or press [2] followed by [Flash] to select Cell Phone 2;
once the cell phone is selected dial out using the desired number*.
When connected ONLY to your Bluetooth Cell Phone(s)
When the Cell2Tel is paired to one or two cell phones and your regular home phone, your
system will work without the Landline
. The regular home phone will respond only if at least
one Cell Phone Line is paired and in connecting mode with a Bluetooth cell phone.
IF both Cell Phone Line/ buttons are paired and in connecting mode with cell phones, the
regular home phone will default to the cell phone paired to the [Cell Phone 1] Line/ button
when dialing out. To dial out over the cell phone connected to the [Cell Phone 2] Line/
button, press [2] followed by [Flash] followed by the desired telephone number on your
regular home phone.
IF both Cell Phone Line/ buttons are paired to cell phones and only one Cell2Tel Cell Phone
Line/ button is in connecting mode with a cell phone, simply pick up the handset of on
your regular home phone to dial out. Listen for the dial tone, and dial the desired number*
to make a call.
TIPS: Dialing & Receiving
¾ For best Bluetooth reception, place your cell phone(s) as close to the Cell2Tel as possible
¾ Make sure the connected cell phone(s) Bluetooth feature is ON.
¾ If either [Cell Phone 1] or [Cell Phone 2] Line is selected and a series of rapid beeps is heard from
the handset, your cell phone may be engaged. The beeps may also indicate the cell phone is not
properly connected or is unpaired. Check the adjacent amber Status Light – IF the light is OFF or
‘blinks slowly’, a cell phone is not connected or paired to that Cell Phone Line on the Cell2Tel.
¾ * When dialing out over your cell phone, press the [#] key at the end of the desired number to force
direct dialing. IF [#] is not entered, the desired number will dial out approximately 5 seconds after
the last digit is entered.
Make Emergency Calls (Dial 9-1-1)
IF the Cell2Tel is connected with a Landline, pick up the handset of the home phone, listen
for the dial tone and press [9][1][1]
IMPORTANT: IF possible, use a landline at home or at work for 9-1-1 calls, as the dispatcher
may get more accurate location information from a landline than a cell phone.
IF the Cell2Tel is connected to Bluetooth cell phones only, pick up the handset of the
home phone, listen for dial tone and press [9][1][1] to dial out the number over the cell phone.
IMPORTANT: IF you use a cell phone to make an emergency call be prepared to provide your
location and any essential information the dispatcher may need. Remain on
the line until told to hang up by the dispatcher. You may also disconnect your
cell phone from Cell2Tel and dial out directly from your cell phone.