User's Manual

Amber Status (LED) Lights
(Cell Phone Line Pairing & Connection Status)
Both Cell Phone Line buttons on the Cell2Tel have an adjacent amber Status Light to indicate
the status of the pairing & connection for the cell phone being paired to the Line.
1. Amber Light ON - indicates a cell phone is paired to the Cell Phone Line/button
2. Amber Light OFF - indicates a cell phone is unpaired from the Cell Phone Line/button
3. Amber light BLINKS Quickly
- while pairing, indicates the selected Cell2Tel Cell Phone Line is in pairing mode
- while paired and connected, indicates an incoming call ringing in
4. Amber light BLINKS Slowly
- indicates a cell phone is paired but NOT connected to the Cell Phone Line button.
Cell2Tel is in Auto Searching & Connecting mode.
5. Amber light BLINKS ‘very’ Slowly (approx. once every 4 seconds) - indicates selected
Cell Phone Line is manually disconnected. Press button again to reconnect.
Operation
Cell2Tel will connect with your Bluetooth cell phone(s) with or without a landline (fixed line).
The Cell2Tel allows you to pair and connect up to two cell phones for dialing and receiving
incoming cell calls. The unit can also be used with or without a fixed landline.
Make an Outgoing Call
When connected to your Landline & Cell Phone(s)
When the Cell2Tel is installed to work with both the Landline (fixed line) and one or two cell phones,
the connected home phone will always default to the landline for all outgoing calls.
Therefore, to make
an outgoing call over your cell phone, you must manually select the Cell Phone Line (Cell
Phone 1 OR Cell Phone 2) you wish to dial out using the connected home phone.
Make an outgoing call over your Landline
Pick up the handset for your home phone that is connected to your Cell2Tel, listen for a
dial tone and dial out the desired phone number. The call will dial out over your landline.
TIP: rapid Beeps heard over Handset
¾ Should you pick up the handset and hear a series of rapid beeps over the handset, check that the
landline is not engaged by another extension phone, and check the cords were properly connected.
In particular, check the telephone cord from the telephone wall and ensure the jack is plugged into
the Cell2Tell’s TEL. LINE jack correctly.
12