User's Manual

11
TIPS: Bluetooth Range Auto Search & Connecting
¾ Bluetooth connections will drop when the cell phone is out of Bluetooth range (approx.
30’). When a connection is dropped, the amber Status Light for the selected Cell Phone
line on the Cell2Tel will blink slowly as the Auto Search & Connecting function will
actively look for the paired cell phone. When the cell returns within range, the Cell2Tel
finds and reconnects to the paired cell phone. The amber Status Light will turn ON
indicating the cell and the Cell2Tel are reconnected.
¾ To shut down the Auto Search & Connecting function for the Cell2Tel and a desired cell
phone, press the Cell Phone line/button for the desired cell on the Cell2Tel once.
Bluetooth Disconnecting
When the Cell Phone button [Cell Phone 1] or [Cell Phone 2] is in ‘connecting mode’, the
adjacent amber Status Light is ON. You may manually disconnect from the cell phone, and at
the same time shut down the Auto Search & Connecting function by:
Press the Cell Phone Line button on the Cell2Tel for the appropriate cell once, the amber
Status Light will blink slowly (one blink approximately every four seconds)
Although the Bluetooth connection for the selected Cell Phone line/button on Cell2Tel may be
disconnected, pay attention to the screen prompts on cell phone paired to the Cell2Tel. Some
cell phones can activate auto connection to continue a search and force a connection to
previously paired Bluetooth devices. Thus, we suggest you shut off your cell phone’s
Bluetooth mode to avoid possible disturbances.
Bluetooth Reconnection
Once the Cell2Tel drops the Bluetooth connection with its paired cell phones, reconnection will
be completed as follows:
IF the connected cell phone is out of range (approx. 30’), the adjacent amber Status Light of
the selected Cell Phone Line/button will blink slowly. The Cell2Tel continues to search
for reconnection to the paired cell phone. The amber Status Light will turn ON once the
Cell2Tel and the cell phone are reconnected.
OR,
IF a selected Cell Phone button on the Cell2Tel is manually disconnected from the paired
cell phone, the adjacent amber Status Light will blink slowly (one blink approx. every 4
seconds). To restart the Auto Search & Connecting mode pres the selected Cell Phone
Line button on the Cell2Tel once and the adjacent amber Status Light will blink slowly.
Once the Cell2Tel finds and connects to the paired cell phone again, the amber Status
Light remains ON and stops blinking.
TIPS: Connections
¾ If an amber Status Light blinks very slowly, press the Cell Phone Line button on the Cell2Tel once
to resume the Auto Search & Connecting mode.
¾ Some cell phones may ask you to accept Bluetooth reconnection, follow the screen prompts IF
presented by your cell phone.