User guide

64
Keyboard/
Mouse
Video
#01
#02
#03
#04
#05
#06
#07
#08
#09
#10
#11
#12
#13
#14
#15
#16
PORT 1
Dip Switch Area
PORT 2
Dip Switch Area
PORT 3
Dip Switch Area
PORT 4
Dip Switch Area
PORT 5
Dip Switch Area
PORT 6
Dip Switch Area
PORT 7
Dip Switch Area
PORT 8
Dip Switch Area
PORT 9
Dip Switch Area
PORT 10
Dip Switch Area
PORT 11
Dip Switch Area
PORT 12
Dip Switch Area
PORT 13
Dip Switch Area
PORT 14
Dip Switch Area
PORT 15
Dip Switch Area
PORT 16
Dip Switch Area
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
Port 9
Port 10
Port 11
Port 12
Port 13
Port 14
Port 15
Port 16
To configure the port, you will need to first select a pair of Category 5
cables that are connected to a receiver card in the system. Connect
these cables to the first available port with the Video cable connecting
to the upper jack and the Keyboard/Mouse cable connecting to the
lower jack. Locate the DIP switches that correspond to that port and
configure them as needed. (See diagram and settings below and on the
next page.)
Repeat this process for every port of every Transmitter Module in
your system.
XP4400
Transmitter