User guide

143
Key Sequence Action
<CM>@0<Enter> Changes the hot-key sequence to the default:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the minus (-) key on the numeric
keypad.
3.Release the ‘Num Lock’ key.
<CM>@1<Enter> Changes the hot-key sequence to the 1st alternate:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the asterisk (*) key on the
numeric keypad.
3.Release the ‘Num Lock’ key.
<CM>@2<Enter> Changes the hot-key sequence to the 2nd alternate:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the plus (+) key on the numeric
keypad.
3.Release the ‘Num Lock’ key.
<CM>@3<Enter> Changes the hot-key sequence to the 3rd alternate:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the numeric keypad forward
slash (/) key.
3.Release the ‘Num Lock’ key.
<CM>@4<Enter> Changes the hot-key sequence to the 4th alternate:
1.Press and hold down the ‘Control’ key.
2.Press and release the tilde (~) key.
3.Release the ‘Control’ key.
<CM>REBOOT Addr[n] <Enter> Reboots the device connected to the XPRB at Addr .
The value,
n (1-6), indicates Power Port on XPRB.
<CM>XPRB
Addr1[n] = Addr2 <Enter> Associates the XPRB at Addr1, Power Port n with
the computer interface module at
Addr2.
<CM>REBOOT<Enter> Reboots the selected computer, if connected to an
XPAB or associated with a power port on an XPRB.
<CM>K
n <Enter> Sets the keyboard scanset for AT and PS/2 systems
where
n is a scanset number 1-3.