Owner`s manual

4 - Preventive Maintenance
Regular Maintenance Activities
Cleaning Your Treadmill — When cleaning your treadmill spray a mild*
cleaning agent, such as a water and dishsoap solution, on a clean cloth first,
and then wipe the treadmill with the damp cloth.
NOTE: Do not spray cleaning solution directly on the treadmill. Direct
spraying could cause damage to the electronics and may void the
warranty.
* Using a non-recommended cleaning solution can cause damage
to your treadmill. Do not use an alkaline cleaner to clean your
treadmill. Read the label on the cleaning product before you use it.
If the ingredients list alcohol or say "not recommended for
aluminum" do not use that product.
! WARNING: To prevent electrical shock, be sure that power is
shut off and the treadmill is unplugged from the
electrical outlet before performing any cleaning or
maintenance procedures.
Use the following routine to help insure your treadmill's long life:
After Each Use — Wipe up any liquid spills immediately. After each workout,
use a damp cloth to wipe up any remaining perspiration from the handrails and
painted surfaces.
Be careful not to spill or get excessive moisture between the edge of the
display panel and the console, as this might create an electrical hazard or
cause failure of the electronics.
! WARNING: Keep wet items away from inside parts of the
treadmill. Electrical shock could occur even if the
treadmill is unplugged.
Every Month — Vacuum any dust or dirt that might accumulate under or
around the 600T. Motors are especially susceptible to dust and dirt, and
restricted airflow can prevent adequate cooling that could shorten motor life.
To clean the motor components, you must remove the two Phillips head screws
that hold the motor cover in place. Lift the cover, and put it and the screws
aside. Use a vacuum attachment or hand vacuum to clean the exposed
elevation assembly, drive motor, lower electronics and the surrounding areas.
Cybex 600T Treadmill Owner’s Manual
Page 4-1
Front Pages
About This Manual . . . . . . . . . . i
FCC Compliance Information . i
Declaration of Conformity . . . . ii
Table of Contents . . . . . . . . . . iii
1 Safety
Important Voltage Information 1-1
Grounding Instructions . . . . 1-1
Important Safety Instructions 1-2
Warning Labels . . . . . . . . . . 1-4
Caution Labels. . . . . . . . . . . 1-5
2 Technical Specifications
Specifications . . . . . . . . . . . 2-1
Stableflex System . . . . . . . . 2-2
3 Operation
Quick Start. . . . . . . . . . . . . . 3-1
Stopping the Treadmill. . . . . 3-1
Automatic Stop Feature . . . 3-1
Selecting Programs &
Options . . . . . . . . . . . . . . . . 3-2
Displaying Heart Rate . . . . . 3-2
The Workout Graph . . . . . . . 3-2
Detailed Operation Guide . . 3-3
Control During Operation . . 3-4
Changing Data Readouts . . 3-5
Use of Programs . . . . . . . . . 3-6
4
Preventive Maintenance
Regular Maintenance
Activities . . . . . . . . . . . . . . . . 4-1
Running Belt Maintenance . 4-3
5 Setup & Assembly
Quick Setup . . . . . . . . . . . . 5-1
Choosing & Preparing a Site 5-1
Electrical Power
Requirements . . . . . . . . . . . . 5-3
Unpacking . . . . . . . . . . . . . . 5-3
Assembling the Treadmill. . . 5-4
Test the 600T Operation . . . 5-8
Setting Operation Options. . 5-9
6
Customer Service
Contacting Service . . . . . . . 6-1
Serial Number & Voltage . . . 6-1
Warranty . . . . . . . . . . . . . . . 6-1
Return Material Authorization
(RMA). . . . . . . . . . . . . . . . . . 6-4
Damaged Treadmill or Parts 6-4
Ordering Parts . . . . . . . . . . . 6-5