Owner`s manual

Control During Operation
Every key on the display is usable during operation. Any key may be pressed at any time to
make adjustments in speed, elevation, level, program choice, workout time, or data readouts.
Changing Speed — Use the Speed and keys arrows to change the speed in
increments of 0.1 mph or 0.10 kph. Maximum speed is 10 mph (16 kph).
Changing Elevation — Use the Incline and arrows to change the elevation in
increments of 1%. Maximum elevation is 15%. (Elevation is defined as the ratio of rise
over run of the treadmill deck.)
Changing Level — Use the and arrows next to the Enter key to change the level in
a program; press Enter to accept your level change.
Changing Programs — Press any program key to change to that program. Your current
workout level will be transferred to the new program, and you will enter that program at
the same place you were in the previous program. If additional setup data is required by
the new program, you will be prompted for that.
Changing Workout Time — Press Time, and use the and arrows to adjust your
workout time, pressing Enter to proceed. Your program profile will be automatically scaled
and adjusted to accommodate the new workout time.
Cybex 600T Treadmill Owner’s Manual
Page 3-4