User guide
20
CLEANING
It is important to use only an original CYBEX Solution X2 seat cover since the
cover is also an essential part of the function. You may obtain spare covers at
your retailer.
DURABILITY OF THE PRODUCT
temperature might occur and since there might be unforeseeable exposures to
the child seat, it is important to note the following:
If the car is exposed to direct sunlight for a longer period of time, the child seat
must be taken out of the car or covered with a cloth.
Examine all plastic and metal parts of the seat for any damages or changes about
their form or colour on a yearly basis. If you notice any changes, you need to
dispose of the child seat or it must be examined by the manufacturer and replaced
if necessary.
Changes to the fabric, in particular the fading of colour, are normal after yearlong
use in a car and do not constitute a fault.
Note!
are machine washable at max. 30°C on delicate cycle. If you wash it at
higher temperature, the cover fabric may lose colour. Please wash the cover
separately and never dry it mechanically! Do not dry the cover in direct sunlight!
You can clean the plastic parts with a mild detergent and warm water.
Warning! Please do not use chemical detergents or bleaching agents
under any circumstances!
WHAT TO DO AFTER AN ACCIDENT
If you had an accident, the seat might have sustained damages which are
not visible. In this case, the child seat must absolutely be examined by
the manufacturer and replaced if necessary.
PULIZIA
Il rivestimento è una parte importante per il funzionamento del seggiolino ed
è indispensabile utilizzare soltanto rivestimenti originali CYBEX Solution X2.
Rivestimenti di ricambio originali sono disponibili presso i rivenditori
autorizzati.
DUREVOLEZZA DEL PRODOTTO
Il seggiolino CYBEX Solution X2 è progettato per l’intera durata del periodo
di utilizzo raccomandato, dai 3 ai 12 anni di età del bambino, ovvero per la
variazioni di temperatura o a circostanze imprevedibili all’interno del veicolo è in
ogni caso importante prendere nota di quanto segue:
Nel caso l’automobile venga lasciata al sole per un lungo periodo di tempo
consigliamo di estrarre il seggiolino o di ripararlo con un telo di copertura.
Controllare tutte le parti plastiche e metalliche del seggiolino almeno una volta
eventualmente esaminare dal produttore e, se necessario, sostituirlo.
normale con l’utilizzo negli anni e non costituisce un difetto.
NB: E‘ consigliato il lavaggio prima del primo utilizzo. Rivestimenti lavabili in
lavatrice, ciclo delicato max 30°. L‘uso di temperature più elevate può scolorire i
tessuti. Lavare separatamente e non asciugare mai a macchina. Non asciugare
alla luce diretta del sole. Le parti in plastica possono essere pulite con
detergente neutro e acqua tiepida.
Attenzione! Non usare mai prodotti chimici o sbiancanti per la pulizia!
COSA FARE A SEGUITO DI UN INCIDENTE
In caso di incidente il seggiolino potrebbe subire danni non
immediatamente visibili. In tal caso il seggiolino dovrà assolutamente
essere inviato al produttore per un controllo e, se necessario, sostituito.