User guide

L.S.P.

WARNING! For your child’s maximum protection, it is essential to use and install

the child seat according to the instructions in this User Guide.

WARNING! The components of the CYBEX child seat must not be used either on

their own or in combination with seat cushions, backrests or headrests from other

manufacturers or other model ranges. In any such cases the child seat will no

longer be certied for use.

WARNING! Always ensure that the individual components of the child seat are

never compressed or jammed (e.g. by the car door or while adjusting the back

seat.)

Note! Please keep the User Guide handy in the slot under the cover at the back of the

backrest.

The child seat consists of a seat cushion (d) and a backrest (a) with a headrest

(e), which adjusts to suit the child‘s height, as well as a safety cushion (p), which is

adjustable for depth. Your child will benefit from maximum protection and comfort only

when all components are used together.

The backrest (a) is hooked onto the axis (c) of the seat cushion (d) by means of the

guide lug (b). Push the two side protectors provided with the „Linear Side-impact

Protection“ System (L.S.P.) into the installation holes (z) provided for this purpose, on

the outer edges of the shoulder brackets. These will lock into place with an audible

„CLICK“.

Note! Please always keep the User Guide in the slot provided for it under the seat

cover, on the back of the backrest.

FIRST INSTALLATION