Owner`s manual
CYBEX Classic Owner's Manual
3. Check narrow grip handle attachment hole for wear. Replace
if
significant wear
is
visible.
Do not use
if
less than
1/8'
of
material remains to the edge. See Figure
5.
Attachment Hole
NOTE: Replace
bar
if
less
than 1/8"
of
material
remains
to
the edge.
Figl:Jre
5
4. Inspect bars and handles for wear, paying particular attention to tab area connecting points. •
Replace all worn handles immediately.
5. Inspect snap links for proper latching (indicates wear).
Replace all worn snap links immediately.
6.
Inspect all labeling for readability. This includes instructional placards, warning and caution
decals.
Replace all warning labeling immediately.
7.
Inspect all weight stacks for proper alignment and operation.
Correct all improper alignment
and
operation issues immediately.
8.
Wipe Weight Stack Guide Rods and Leg Press Linear bearings clean over entire length.
Lubricate with a light coat
of
medium weight automotive engine oil.
•
Pags54