Owner`s manual

•
•
•
CYBEX Classic Owner's Manual
Weekly Procedures
1. In pect all nuts and bolts for looseness. Tighten as required.
2. Inspect all cables for wear
or damage and proper tension. When inspecting cables, run
your fingers on the cable, paying particular attention to bends
in the cable and attachment
points.
Replace all worn cables immediately. The following conditions may indicate a
worn cable:
• A tear or crack in the cable sheath that exposes the cable. See Figure I.
I \ ., 1
Figure 1
A kink in the cable. See Figure 2.
hll..------~0' ..... ---------J~
Figure 2
• A curled sheath. See Figure 3.
C::::::::::: __ ~-=::::::::::--:::::::'
Figure 3
• "Necking", a stretched cable sheath. See Figure 4.
1
6
9
Figure 4
PBg85-3