Owner`s manual

•
•
•
SAFETY
Strength training can be a safe and rewarding
activity. Always follow the recommendations
listed below as they can help ensure training is
productive and free from injury.
1. All Training or rehabilitation sessions should
be supervised by trained personnel.
2. It is very important that all users be
instructed on the proper use of each
CYBEX Modular Strength systems.
Particular attention should be given to the
following:
A. Setup and alignment for each individual.
B. Entrance and exit from the unit.
C. Proper form when using the unit.
3. To reduce chance of injury, users should
adhere to the following rules:
A. Keep head and limbs clear of
cable/pulley junction(s).
B. Do not exceed any exercise or
movement restrictions prescribed by a
doctor or therapist. This is particularly
important for those at risk due to:
• Known heart disease
• Known hypertension (high blood pressure)
• Obesity
2-1
2
4. Instruct all users to report any equipment
irregularity or personal injury to supervisory
personnel immediately.
5. Instruct all personal in equipment inspection
and accident recording/reporting.
6. Inspect and maintain equipment at regular
intervals. Pay particular attention to cable
and hardware inspection as noted
in
Section 3.
7. Use extra caution when assembling and
installing equipment, particularly when lifting
or moving heavy objects
(Le. installing
weight stacks) and when using power tools.
8. CAUTION: CYBEX recommends anchoring
all CYBEX Strength Systems equipment
to
the floor for maximum safety.
NOTE: CYBEX is not responsible for the
actual anchoring
of equipment. Consult with
a professional contractor.
Use fasteners having a minimum of 500 Ibs
tensile capacity (3/8" grade 2 bolt or
better).
If aI/legs/frames do not contact surface,
DO
NOT pull down with anchors. Shim any
leg
or frame not in contact with surface with
flat washers.