Cybex CX-445T Treadmill Owner’s Manual Cardiovascular Systems Part Number LT-19800-4 Rev B www.cybexinternational.
Cybex 445T Treadmill Owner’s Manual About This Manual An Owner’s Manual is shipped with each unit. To purchase additional copies of this manual or any other Cybex manual, please do one of the following: • • • • order online at www.cybexinternational.com fax your order to 508-533-5183 contact Cybex Customer Service at 800-766-3211 or contact Cybex Customer Service at 508-533-4300 To contact Cybex with comments about this manual you may send email to techpubs@ cybexintl.com.
Cybex 445T Treadmill Owner’s Manual August 24, 2006 DECLARATION OF CONFORMITY This Declaration of Conformity is suitable to the European Standard EN 45014, “General criteria for supplier’s declaration of conformity.” We, Manufacturer: Cybex International, Inc.
Cybex 445T Treadmill Owner’s Manual As a result of test reports and their evaluation by accredited laboratories, we are in possession of the following certificates for products which carry this marking: Canada, USA CAN/CSA-C22.2 No.68-92/99 UL Std. No.
Cybex 445T Treadmill Owner’s Manual EN 61000-4-11:1994 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests EN 61000-3-2:2000 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16A per phase) EN 61000-3-3:1995 W/ corr.
Cybex 445T Treadmill Owner’s Manual Table of Contents Front Pages About this Manual . . . . . . . . . . . . . . . . . . FCC Compliance Information. . . . . . . . . . Declaration of Conformity . . . . . . . . . . . . Table of Contents . . . . . . . . . . . . . . . . . . . 4 Preventive Maintenance i i ii v 1 Safety Important Voltage Information . . . . . . . Grounding Instructions. . . . . . . . . . . . . Important Safety Instructions . . . . . . . . Warning Decals . . . . . . . . . . . . . . . . . .
Cybex 445T Treadmill Owner’s Manual 1 - Safety IMPORTANT: Read all instructions and warnings before using the treadmill. Important Voltage Information Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your area match the voltage of the treadmill that you have received.
Cybex 445T Treadmill Owner’s Manual Important Safety Instructions (Save These Instructions) ! DANGER: To reduce the risk of electric shock, always unplug this treadmill from the electrical outlet immediately after using it and before cleaning it. ! WARNING: Serious injury could occur if these precautions are not observed. To reduce the risk of burns, fires, electric shock, or injury: User Safety Precautions • DO NOT wear loose or dangling clothing while using.
Cybex 445T Treadmill Owner’s Manual • Use a dedicated line when operating the treadmill. NOTE: A dedicated line requires one circuit breaker per unit. • Connect the treadmill to a properly grounded outlet only. • DO NOT operate electrically powered treadmills in damp or wet locations. • Keep the running belt clean and dry at all times. • DO NOT leave the treadmill unattended when plugged in and running.
Cybex 445T Treadmill Owner’s Manual • Carefully read and understand the following before using the 445T treadmill: • Warning Decals • Caution Decals To replace any worn or damaged decals do one of the following: Visit www. cybexinternational.com to shop for parts online, fax your order to 508-533-5183 or contact Cybex Customer Service at 800-766-3211. If you live outside of the USA, call 508-533-4300. For location or part number of labels, see the parts list and exploded-view diagram.
DE-19238 Cybex 445T Treadmill Owner’s Manual DE-19238 Warning Motor Cover Safety Page 1-5
Cybex 445T Treadmill Owner’s Manual DE-16928 Warning Motor Cover Safety Page 1-6
Cybex 445T Treadmill Owner’s Manual All maintenance activities shall be performed by qualified personnel.
Cybex 445T Treadmill Owner’s Manual Caution Decals Caution decals indicate a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. There are no caution decals used on this unit. However, there are caution statements listed in Chapters 5 and 6 of this manual. See Chapters 5 and 6. Emergency Stop Key (e-stop) The e-stop key functions as the emergency stop. In an emergency situation, remove the e-stop key and the treadmill will come to a stop.
Cybex 445T Treadmill Owner’s Manual 2 - Technical Specifications Specifications Length: 72” (183 cm). Width: 32” (82 cm). Running Area: 20” x 60” (51 cm x 152 cm). Weight of Product: 320 lbs. (145 kg). Shipping Weight 350 lbs. (159 kg). Speed Range: 0.5 to 11.0 mph (0.8 to 17.6 kph) in 0.1 mph or 0.1 kph increments. Incline Range: 0 to 15% grade. Manual Mode: Yes.
Cybex 445T Treadmill Owner’s Manual 3 - Operation Read and understand all instructions and warnings prior to using the treadmill. See all of the safety related information located in chapter 1. Terms and Symbols Used This section lists some of the common terms and symbols used in this chapter. Other terms and symbols are listed in this chapter as appropriate. Dormant Mode — This occurs when the treadmill is plugged in, turned to the on (I) position and not in use.
Cybex 445T Treadmill Owner’s Manual Quick Operation Guide NOTE: Maximum user weight is 350 lbs. (159 kg). The following is a quick overview of the operation of the treadmill. For more information read Detailed Operation Guide in this chapter. 1. Place your feet on the two top steps located on each side of the running belt. ! WARNING: Do not stand on the running belt when starting the treadmill. Always place your feet on the two top steps when beginning a workout. 2.
Cybex 445T Treadmill Owner’s Manual ! WARNING: Do not stand on the running belt when starting the treadmill. Always place your feet on the two top steps when beginning a workout. 3. Place your feet on the two top steps located on each side of the running belt. 4. Clip the e-stop clip onto your clothing and carefully test the e-stop key to ensure it will activate in case of an emergency. See Emergency Stop Key (e-stop) in Chapter 1 for properly testing the e-stop key.
Cybex 445T Treadmill Owner’s Manual 9. Press the Speed + — keys to change the belt speed at any time. The right display will show the set speed. 10. Press the Incline keys to change the incline at any time. The left display will show the current incline only when incline keys are used, then revert to time. manual programs HR control Cybex International, Inc. Medway, MA USA (508) 533-4300 www.CybexInternational.com CHANNEL Wireless HR Receiver Inside VOLUME Figure 1 11.
Cybex 445T Treadmill Owner’s Manual Press Pause/Stop a second time to interrupt workout data from cycling and to change the display to Dormant Mode. The function of the immobilization method: The purpose of immobilizing the treadmill is to prevent unauthorized use. This can be accomplished by removing the e-stop key from the console, unclipping it from the cord and putting it in a non-accessible place. See Figure 2.
Cybex 445T Treadmill Owner’s Manual Workout Time — You can workout up to the maximum time by pressing Quick Start. Changing Data Readouts — Default setting is for scan to start automatically. Press Scan to stop and display a set of data. Press Scan once again and it will continually review each set of data. The display shows each set of data for 3 seconds before switching to the next set.
Cybex 445T Treadmill Owner’s Manual Data displayed during a program: The top center display will continually review each set of data. Each set of data is displayed for 3 seconds before the next set is displayed. The corresponding LED lights as the data is displayed. To review accumulated data after a program: The display automatically cycles through your accumulated workout data during the Workout Review for up to 20 seconds or the preset idle time.
Cybex 445T Treadmill Owner’s Manual Heart Rate Zone Heart Rate is described by the number of times your heart beats in a minute. At rest, the average adult will have a heart rate of about 72 beats per minute (bpm). As one begins to exercise, heart rate increases and continues to increase as exercise intensity or difficulty increases. Monitoring your heart rate is an effective way to control the intensity of your workout and subsequently the results it will have.
Cybex 445T Treadmill Owner’s Manual The degree of incline can be related to % grade by taking the Arctangent of the grade. For instance, 15% grade is equal to 8.53 Degrees (ArcTan(.15)=8.53º). The opposite is true to determine % Grade from Degree of incline (Tan (8.53º)=.15). Use of Programs ! WARNING: Obtain a medical exam before beginning any exercise program. Begin comfortably with a lower level and progress with higher levels as you become acclimated.
Cybex 445T Treadmill Owner’s Manual Speed Interval 1 (P-1) Program Overview This program is designed to introduce an individual to incorporating running into their training. The program uses exclusively 0% incline with a repeating 1:2 work to rest ratio. Each work segment lasts 30 seconds and each rest segment lasts 60 seconds. The speeds during the rest segments are at a walking pace while the speeds in the work segments are approximately double the rest speed. Figure 5.
Cybex 445T Treadmill Owner’s Manual Speed Interval 1 Profiles Show Level 10 at 10 Minutes MPH 11.0 Speed — — — — — — — — —10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — 6.0 — — — — — — — — — 5.0 — — — — — — — — — — 4.0 — — — — — — — — 3.0 — — — — — — — — — — 2.0 — — — — — — — — 1.0 — — — — — 2EPEATING SEGMENT KPH — — — — — — — 17.0 — — — — — — — — — — 16.0 — — — — — — — — — 15.0 — — — — — — — — 14.0 — — — — — — — — — — 13.0 — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual Speed Interval 2 (P-2) Program Overview This program is designed for those wishing to introduce speed into their training. The program uses exclusively 0% incline with a repeating 1:3 work to rest ratio. Each work segment lasts 15 seconds and each rest segment lasts 45 seconds. The speeds during the rest segments are at a walking pace while the speeds in the work segments are approximately triple the rest speed. See table below and Figure 6.
Cybex 445T Treadmill Owner’s Manual Speed Interval 2 Profiles Show Level 10 at 10 Minutes MPH 11.0 Speed — — — — — — — — —10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — — 6.0 — — — — — — — — 5.0 — — — — — — — — — 4.0 — — — — — — — — — 3.0 — — — — — — — — — 2.0 — — — — — — — — — — — 1.0 — — — 2EPEATING SEGMENT KPH — — — — — — — — 17.0 — — — — — — — — — 16.0 — — — — — — — — 15.0 — — — — — — — — — — 14.0 — — — — — — — — — 13.0 — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual Hill Interval (P-3) Program Overview This program is designed to introduce some variability into the program while maintaining a constant walking pace. The Hill Interval program varies the incline between two levels every 60 seconds. This provides for moderate variation that that elicits an improved result over steady state walking up an incline. See table below and Figure 7. Base Speed / Base Elevation mph % grade Level 1 2 3 4 5 6 7 8 9 10 Operation Page 3-14 1.7 2.
Cybex 445T Treadmill Owner’s Manual Hill Interval Profiles Show Level 10 at 10 Minutes MPH 11.0 Speed — — — — — — — — — 10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — — 6.0 — — — — — — — — 5.0 — — — — — — — — — 4.0 — — — — — — — — — 3.0 — — — — — — — — — 2.0 — — — — — — — — — — — 1.0 — — — Elevation % 2EPEATING SEGMENT KPH — — — — — — — — 17.0 — — — — — — — — — 16.0 — — — — — — — — 15.0 — — — — — — — — — 14.0 — — — — — — — — — — 13.0 — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual Pikes Peak (P-4) Program Overview Pikes Peak uses a nine-minute core where the incline increases every minute for the first five minutes. As the incline increases, speed is slightly reduced in the same fashion as it would if one where hiking up an ever steeper hill. After the fifth minute of the core program, the incline is reduced each minute and the speed increases. All speeds in this program are at a walking pace. See table below and Figure 8.
Cybex 445T Treadmill Owner’s Manual Pikes Peak Profiles Show Level 10 at 13 Minutes MPH 11.0 Speed — — — — — — — — — 10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — — 6.0 — — — — — — — — 5.0 — — — — — — — — — 4.0 — — — — — — — — — 3.0 — — — — — — — — — 2.0 — — — — — — — — — — — 1.0 — — — 2EPEATING SEGMENT KPH — — — — — — — — 17.0 — — — — — — — — — 16.0 — — — — — — — — 15.0 — — — — — — — — — 14.0 — — — — — — — — — — 13.0 — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual Rolling Hills (P5) Program Overview The Rolling Hills program uses a four-minute core. In the core program each minute represents a segment. Segments two and four are the “rest” intervals and use the same speed. The first and third segments also use higher speeds than the rest intervals with the first segment having the least incline and the third having the greatest.
Cybex 445T Treadmill Owner’s Manual Rolling Hills Profiles Show Level 10 at 10 Minutes MPH 11.0 Speed — — — — — — — — —10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — — 6.0 — — — — — — — — — 5.0 — — — — — — — — 4.0 — — — — — — — — — 3.0 — — — — — — — — — 2.0 — — — — — — — — — — — 1.0 — — — Elevation % 2EPEATING SEGMENT KPH — — — — — — — 17.0 — — — — — — — — — 16.0 — — — — — — — — — 15.0 — — — — — — — — — 14.0 — — — — — — — — — 13.0 — — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual Hills (P-6) Program Overview The Hills program is a constant speed walking program that introduces incline that varies each minute to for a series of relative peaks and valleys. See table below and Figure 10. Base Speed / Base Elevation mph % grade Level 1 2 3 4 5 6 7 8 9 10 Operation Page 3-20 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 0% 0% 1% 2% 3% 4% 5% 6% 7% 8% Peak Speed mph / Peak Elevation % grade 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.
Cybex 445T Treadmill Owner’s Manual Hills Profiles Show Level 10 at 10 Minutes MPH 11.0 Speed — — — — — — — — —10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — — 6.0 — — — — — — — — 5.0 — — — — — — — — — 4.0 — — — — — — — — — 3.0 — — — — — — — — — 2.0 — — — — — — — — — — — 1.0 — — — Elevation % 2EPEATING SEGMENT KPH — — — — — — — — 17.0 — — — — — — — — — 16.0 — — — — — — — — 15.0 — — — — — — — — — — 14.0 — — — — — — — — — 13.0 — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual Weight Loss (P-7) Program Overview This program was designed to help individuals of all fitness levels achieve their weight loss goals through a protocol that incorporates both low and moderate intensity activity. Because walking has become a popular mode of exercise for those looking to lose weight, all levels of this program are performed at walking speeds. The core of the program is made up of five one-minute segments.
Cybex 445T Treadmill Owner’s Manual Weight Loss Profiles Show Level 10 at 10 Minutes MPH 11.0 Speed — — — — — — — — —10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — — 6.0 — — — — — — — — 5.0 — — — — — — — — — 4.0 — — — — — — — — — 3.0 — — — — — — — — — 2.0 — — — — — — — — — — — 1.0 — — — Elevation % 2EPEATING SEGMENT KPH — — — — — — — — 17.0 — — — — — — — — — 16.0 — — — — — — — — 15.0 — — — — — — — — — — 14.0 — — — — — — — — — 13.0 — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual Cardio (P-8) Program Overview This program was designed for the exercise participant who wants to improve the overall efficiency of their cardio-respiratory system. Unlike some of the other treadmill programs that incorporate low and moderate intensity segments, the Cardio program contains overall higher intensity levels with more moderate recovery segments.
Cybex 445T Treadmill Owner’s Manual Cardio Profiles Show Level 10 at 12 Minutes MPH 11.0 Speed — — — — — — — — —10.0 — — — — — — — — — 9.0 — — — — — — — — — 8.0 — — — — — — — — — 7.0 — — — — — — — — — — 6.0 — — — — — — — — — 5.0 — — — — — — — — 4.0 — — — — — — — — — 3.0 — — — — — — — — — 2.0 — — — — — — — — — — — 1.0 — — — Elevation % KPH 2EPEATING SEGMENT — — — — — — — — 17.0 — — — — — — — — 16.0 — — — — — — — — — — 15.0 — — — — — — — — 14.0 — — — — — — — — — 13.0 — — — — — — — — — — 12.
Cybex 445T Treadmill Owner’s Manual 4 - Preventive Maintenance Warnings/Cautions All warnings and cautions listed in this chapter are as follows: ! WARNING: All maintenance activities shall be performed by qualified personnel. Failure to do so could result in serious injury. ! WARNING: To prevent electrical shock, be sure that power is shut off and the treadmill is unplugged from the electrical outlet before performing any cleaning or maintenance procedures.
Cybex 445T Treadmill Owner’s Manual NOTE: Do not spray cleaning solution directly on the treadmill. Direct spraying could cause damage to the electronics and may void the warranty. ! WARNING: To prevent electrical shock, be sure that power is shut off and the treadmill is unplugged from the electrical outlet before performing any cleaning or maintenance procedures. After Each Use — Wipe up any liquid spills immediately.
Cybex 445T Treadmill Owner’s Manual Running Belt Maintenance Belt and Deck — Wipe the belt surface and the deck area with a clean dry towel to minimize the effect of friction between the deck and the running belt. This should be done often to prevent premature wear of the deck, running belt, and the drive motor system. See the Service Schedule at the end of this chapter. The running belt may become loose and slip on the drive roller with each foot plant.
Cybex 445T Treadmill Owner’s Manual 2. Center the belt. NOTE: While centering the belt choose one bolt to adjust. Do not adjust both bolts. A. With the treadmill running at 5 mph (8 kph) observe the running belt. If the belt tracks off center to the right or left the deck will become exposed. Use a 3/4” socket wrench to tighten the rear roller bolt on the side of the treadmill toward which the belt is moving.
Cybex 445T Treadmill Owner’s Manual Other Preventive Maintenance Other preventive maintenance activities must be completed by a qualified service technician at the recommended intervals listed in the Service Schedule at the end of this chapter. These activities include: • Measure the motor brushes and replace worn motor brushes • Replace the running deck and bushings • Replace the running belt Elevation Motor Lubrication — In time the elevation motor pivot points may develop a squeak.
Cybex 445T Treadmill Owner’s Manual Service Schedule All maintenance activities shall be performed by qualified personnel. Failure to do so could result in serious injury. NOTE: This is the minimum recommended service. 1. Determine mileage. A. While in Dormant Mode enter Test Mode by pressing and holding the Pause/Stop key for five seconds. B. Press the Dist key. DIST appears on the display. Record Mileage. NOTE: Once the unit exceeds 999 miles or kilometers the odometer will use both screens.
Cybex 445T Treadmill Owner’s Manual 2. Resetting the service odometer. A. While in Dormant Mode enter Test Mode by pressing and holding the Pause/Stop key for five seconds. B. Press the Cool Down key to display “SVC” and miles or kilometers on service odometer. C. Press the or key to display “RST”. D. Press the Enter key to reset the service odometer to zero. NOTE: Service may be performed before the 12,000 miles (19,300 km) service prompt appears.
Cybex 445T Treadmill Owner’s Manual 5 - Setup and Assembly Warnings/Cautions All warnings and cautions listed in this chapter are as follows: ! WARNING: Use extreme caution when assembling the treadmill. Failure to do so could result in injury. ! WARNING: During this procedure STAY OFF THE RUNNING BELT! Stand with your feet on the two steps. ! CAUTION: A minimum of two people are required to lift, move and assemble this treadmill. Always use proper lifting methods when moving heavy items.
Cybex 445T Treadmill Owner’s Manual Electrical Power Requirements The power requirements for this treadmill are a grounded, dedicated circuit, rated for one of the following: 115 VAC ±5%, 60 Hz and 20 amps; 220 VAC, 60 Hz, 12 amps or 230 VAC ±5%, 50 Hz and 12 amps. Contact your electrician to ensure the power supply complies with local building codes. Do not use a ground plug adapter to adapt the 3-prong power cord plug to a non-grounded electrical outlet. Do not use an extension cord.
Cybex 445T Treadmill Owner’s Manual Item Qty 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 17 1 NA means Not Part Number Varies Varies NA AX-19027 PL-19061 AX-19239 PL-18991 PL-18992 AX-19354 LT-19800-4 LT-19340 LT-19801 AX-19150 Applicable #9 Description Base assembly Console assembly Upright assembly Console back Cover, console back Motor cover, center Motor cover, right (in box) Motor cover, left (in box) Hardware pack (in box) Owner’s manual (in box) Assembly poster Warranty sheet Assembly, E-S
Cybex 445T Treadmill Owner’s Manual C. Check off ( Item Qty 13 14 14 9 15 6 16 4 ) each item in the hardware pack as you find it. See Figure 2. Part Number HS-11977 HS-15706 HS-16929 HS-16939 Description Screw, SEMS, 8-32 x .38”, PNHD PHIL Screw, 8-16 x .50”, PNHD, STL, BLK Bolt, Whiz Lock, 3/8-16 x .625”, HXHD Screw, SEMS, 10-32 x .
Cybex 445T Treadmill Owner’s Manual ! CAUTION: A minimum of two people are required to lift, move and assemble this treadmill. Always use proper lifting methods when moving heavy items. 4. Lift and move the treadmill. A. At least two people should lift and move the treadmill to a level location where you intend to leave it. Use proper lifting methods. 5. Verify the model and voltage. A. Verify that you have the correct model and voltage by looking at the serial number label located at the rear of the unit.
Cybex 445T Treadmill Owner’s Manual 7. Install the console back to the upright assembly. A. Locate the console back (#4) and twelve screws, 8-32 x .38” (#13). B. Place the console back (#4) in the correct position on the upright assembly (#3). See Figure 5. #4 #13 #13 #3 Figure 5 C. Using a Philips head screwdriver install two screws 8-32 x .38” (#13) to hold the console back (#4) in place. Do not fully tighten at this time. See Figure 5. D.
Cybex 445T Treadmill Owner’s Manual NOTE: If installing the A/V option, refer to the 445T A/V bracket installation instructions (supplied with the A/V bracket). 8. Install the console assembly to the console back. A. Locate the console assembly (#2), two screws, 8-32 x .38” (#13) and nine screws 8-16 x .50” (#14). B. Place the console assembly (#2) in position on the console back (#4). See Figure 7. #2 #4 Figure 7 C.
Cybex 445T Treadmill Owner’s Manual D. Check to see that all of the cables are connected firmly in their proper place. See Figure 8. E. While being sure not to pinch any cables, use a Philips head screwdriver to secure the seven screws 8-16 x .50” (#14) that hold the console assembly (#2) to the console back (#4). See Figure 9. F. Using a Philips head screwdriver secure the two screws (#13) securing the console assembly (#2) to the upright assembly (#3). See Figure 9. G.
Cybex 445T Treadmill Owner’s Manual NOTE: If installing the Extension Handrail option, refer to the 445T Extension Handrail installation instructions (supplied with the Extension Handrails). 10. Level your treadmill. A. Confirm that your treadmill is on a level surface. 11. Attach emergency stop key. A. Confirm that the emergency stop key is in place over the e-stop button. See Figure 12. NOTE: The treadmill will not run without the key in place. Emergency Stop Button Figure 12 12.
Cybex 445T Treadmill Owner’s Manual ! WARNING: Be sure that all electrical requirements are met as indicated in the specifications at the front of the manual and at the beginning of this chapter prior to proceeding. Testing the Treadmill Operation Use the following instructions to test the full speed and incline range of the treadmill and to check the belt for proper operation. ! CAUTION: During this procedure STAY OFF THE RUNNING BELT! Stand with your feet on the two steps. 1.
Cybex 445T Treadmill Owner’s Manual 11. Run the treadmill through its full % grade range. Press the Incline key until the treadmill reaches its highest grade (15%). Then press the Incline key until the treadmill is back to 0% grade. Ensure the power cord is not being pinched under the front of the treadmill. 12. Press Stop twice to stop the running belt, end the workout review, and return the display to Dormant Mode. Setting Operation Options 1.
Cybex 445T Treadmill Owner’s Manual ELV — This is the maximum elevation the treadmill will incline. Choices are between 0 and 15 percent grade. Safety Sentry (SAFE) — This is how long the running belt will keep moving if the user steps off the treadmill. Choices are between 0 seconds (none) and 60 second. Default is 20 seconds. Choosing “none” will disable this feature. NOTE: See Safety Sentry in Chapter 3 for further detail.
Cybex 445T Treadmill Owner’s Manual 6 - Customer Service Contacting Service Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 800-766-3211. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. Order parts and find information on the web at www.cybexinternational.com or by e-mail at techhelp@ cybexintl.com.
Cybex 445T Treadmill Owner’s Manual Return Material Authorization (RMA) The Return Material Authorization (RMA) system outlines the procedures to follow when returning material for replacement, repair, or credit. The system assures that returned materials are properly handled and analyzed. Follow the following procedures carefully. Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request an RMA from Cybex, if applicable.
Cybex 445T Treadmill Owner’s Manual Concealed Damage — Damage not seen with a visual check upon receipt of a shipment but noticed later must be reported to the carrier as soon as possible. Upon discovery of the damage, a written or phone request to the carrier asking them to perform an inspection of the materials must be made within ten days of the date of delivery. Keep all shipping containers and packing materials: they will be needed as part of the inspection process.
Cybex 445T Treadmill Owner’s Manual Parts List ITEM QTY. PART NO. NO.
Cybex 445T Treadmill Owner’s Manual ITEM QTY. PART NO. NO.
Cybex 445T Treadmill Owner’s Manual ITEM NO. 315 316 317 318 402 403 404 405 406 407 NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NOTE: Customer Service Page 6-6 QTY. PART NO. DESCRIPTION 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 4 2 1 1 1 1 1 1 1 NS = Console, Plastic, 445T Membrane, 445T, Top, English Membrane, 445T, Bottom, English Label, Warning Assembly, TV Support Controller Mount Screw, 1/4-20 x 1.
Console Assembly Optional Monitor Bracket 315 304 Console Assembly 300 402 312 316 317 312 1 404 310 405 9 70 403 314 313 311 309 305 407 308 306 406 211 70 64 70 11 40 41 44 31 Idler Pulley Assembly Upright Assembly Upright Assembly 33 97 95 42 42 56 33 66 35 47 65 10 61 17 34 34 35 62 34 96 301 48 35 31 23 49 18 63 12 46 46 210 204 220 221 51 205 223 222 203 6 200 34 35 50 29 68 39 98 34 2 94 35 31 208 35 39 318 43 27 45 205
1 2 6 UP THERMAL ZERO POSITION SWITCH 4 5 6 7 8 1 2 3 4 5 6 7 8 J3 8 CHASSIS GND N/C B+ TXD RXD N/C N/C BLACK WHITE J1 AW-19716 POWER CORD, 230V 3 5 9 2 3 RED TREADMILL CHASSIS RED AW-19843 7 8 6 1 3 2 BLUE 7 BROWN 8 8 BROWN BLACK 9 9 BLACK WHT/BLK WHT/RED 3 VIOLET 11 12 10 11 12 10 WHT/BLK 7 GRAY 2 4 6 GREEN 5 5 ORANGE 1 GRAY YELLOW 4 4 BLUE RED 6 SW-18535 SWITCH, MICRO, NO SW1 4 SW3 5 5 DISPLAY CONNECTORS 1 WHITE P4 P1 1 9 6 3
