Manual
11
–
stroller is likely to become unstable. Overloading can also damage the vehicle.
–
rain covers, buggy boards, bag hooks, etc. will not be covered by the terms of our
warranty.
–
– Before using the stroller, always check whether the accessories are well secured.
–
–
–
damage or break the stroller. Check the instruction manual if necessary.
–
–
–
INSTRUCTIONS FOR MAINTENANCE
–
to ensure that the locking and swiveling mechanism are treated regularly with Teflon
–
–
–
–
– The frame tubes covered by the locking mechanism and turning mechanism should
CLEANING
–
dry thoroughly.
–
–
be hand washed with mild detergent at max. 30° C.
–
before reuse.
– All CYBEX fabrics have been tested, but when the stroller is very wet, the water may
Note!
THIS PRODUCT WAS APPROVED ACCORDING TO THE
EN1888:2012 STANDARD.
INSTRUCTIONS FOR USE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY
BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE.
YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT
FOLLOW THESE INSTRUCTIONS.
1. OPENING THE STROLLER
2. ASSEMBING THE WHEELS
Remove the front wheels.
WARNING: CHECK THAT THE SEAT UNIT ATTACHMENT
DEVICES AND CARRYCOT/CAR SEAT ADAPTERS ARE
CORRECTLY ENGAGED.
5. USING THE HARNESS SYSTEM
To fasten the harness system insert left and right side fasteners into the central harness
buckle.
To release the fasteners squeeze the grooves on left and right side of the central harness
buckle.
3. AUTOMATIC FRONT WHEEL SWIVEL LOCKS
4. USING THE BRAKES
–
again until you hear a CLICK.
– Tilt the lever located at the right wheel to secure the brake. To release the brake tilt
the lever again.
6. ADJUSTING THE HARNESS SYSTEM FOR NEWBORNS
–
situated at the bottom of the backrest under the seat cover.