User guide

AutoView Commander Installer/User Guide
16
The Channel Maintenance Menu is accessed from the Administrator
Command Menu, and is available if you are operating in non-secure mode
or if you are the system administrator. Here you can add, delete or alter
individual channels.
Adding New Channels (base unit only)
1. Select ‘Add channel’ from the Channel Maintenance Menu. Type in a
new channel name, up to 14 characters long, and press Enter.
2. Type in the channel letter for the PC you are naming and press Enter.
3. When prompted for another cascade level, type N and press Enter.
Press Esc at any point to exit this operation without adding the channel.
Adding New Channels (with a cascaded unit)
1. Select ‘Add channel’ from the Channel Maintenance Menu. Type in a
new channel name, up to 14 characters long, and press Enter.
2. Type in the AutoView channel letter that corresponds to the port that
the second cascaded AutoView unit is attached to and press Enter.
Games
Cybex Control Panel
Configure Channel
Program Manager
Add Channel
ENTER-accept ESC-previous
?
Change ChannelAddress
Options For ID window
Dwell Time For ID window
Alpha Scan Dwell Time
Delete Channel
Change Channel Name
Basic Channel
Maintenance
THE CHANNEL MAINTENANCE WINDOW