User guide
32 AutoView 200/400 Installer/User Guide
To scan using a keyboard hotkey sequence:
See Keyboard Switching later in this chapter.
To scan using the OSD menu:
1. Press the Control key twice to access the Administrator Channel List.
2. Press Control twice more to access the Administrator Commands menu.
3. Highlight Scanning. Use the Spacebar to toggle through the list of options:
is Off, by Name, by Address or, on the AutoView 400, by List.
4. Press Enter to activate your selection.
Setting up a custom scan list (AutoView 400 only)
Scanning by list allows you to create a customized scanning order for the
switch to follow. Any active channel in the system can be scanned in any
order, as many times as desired.
To access the Administrator Scan List menu:
1. Press the Control key twice to access the Administrator Channel List.
2. Press Control twice more to access the Administrator Commands menu.
3. Highlight Setup Scan List and press Enter. The Administrator Scan List
menu appears.
Figure 3.8: Administrator Scan List Menu
To add a channel to the Scan List:
1. Press the F2 key to open a new selection.
2. Type the address of the channel you want to add to the list. The dwell
time and channel name are updated automatically from the channel
Avocent Control Panel
Administrator Scan List
Address Dwell Name
A5Elisabeth
B5Pam
C5John
D5Charlene
ENTER = next ESC = exit