User guide

Chapter 3: Basic Operations 25
2. Press the keyboard Control key twice within one second again. The
Administrator Commands menu appears.
3. Highlight Add Channel and press Enter. The Add Channel menu appears.
Figure 3.4: Add Channel Menu
4. Type in a new channel name, up to 14 characters long, and press Enter.
5. Type in the address for the computer you are naming and press Enter. The
address cannot be longer than two characters.
6. Type the dwell time for the ID window and press Enter.
7. Type the dwell time for scanning and press Enter.
8. Highlight ID Setup and press Enter. Use the Arrow keys to position the ID
window where you would like it to appear when this channel is selected. Press
Enter. For more information, see Confi guring the ID window in this chapter.
9. Highlight Save Changes and press Enter.
-or-
Press Escape to exit the window without saving changes.
To edit an existing channel:
1. Highlight the channel you wish to change in the Administrator Channel List.
2. Press the Control key twice to access the Commands menu.
-or-
Press the F2 key once. (If you press F2, skip to step 4.)
3. Highlight Edit Channel and press Enter. The Edit Channel menu appears.
Scan Dwell Time 5
Avocent Control Panel
Add Channel
Name Marketing
Address C
ID Dwell Time 5
ID Setup
Save Changes
ENTER = next ESC = exit