User guide

Chapter 3: Basic Operations 23
To select a channel in the OSD:
1. Use the Up or Down Arrow keys or the mouse to select a channel.
-or-
Press the Home or End key to move directly to the top or bottom of the list.
-or-
Type a letter to move the highlight bar to the first channel name beginning
with that letter. Press the letter repeatedly to scroll through all channels
that begin with that letter from top to bottom.
2. Press Enter.
To select servers without displaying the OSD:
1. Press and hold down the Num Lock key. Press and release the Minus
(-) key on the numeric keypad. Now release the Num Lock key. The
Command Line screen appears.
2. Type the channel address of the computer you wish to access.
3. Press Enter. For more information, see Keyboard Switching in this chapter.
Setting up the On-Screen Display (OSD)
All commands other than selecting servers are performed from the Administrator
Commands menu. If you are operating in non-secure mode or are the system
administrator, you will have several options that do not appear in the user level
Command menu. Add Channel, Edit Channel, Delete Channel and Administrator
Functions are all covered in separate sections in this chapter.
Figure 3.3: Administrator Commands Menu
Reset PS/2 Standard Mse/Kbd
Avocent Control Panel
Administrator Commands
Add Channel
Delete Channel
Scanning is OFF
Version Information
ENTER = activate ESC = exit
Edit Channel
Administrator Functions
Setup Scan List
Reset PS/2 Wheel Mse/Kbd