User guide

AutoView 424 Installer/User Guide
Key Sequence Action
<CM>SG<Enter> Enables the scan Go command. (By Address Only)
<CM>SH<Enter> Enables the scan Halt command.
From the OSD menu.
1. From the main OSD Window, press the Control key twice to access
the Command Menu.
2. Select ‘Scanning is OFF’, ‘Scanning by Name’, ‘Scanning by Address’ or
‘Scanning by List’ from the menu. This is a toggle option - only one
scanning option will show on the menu at any one time.
Selecting ‘by Name’ will scan channels alphabetically by name;
choosing ‘by Address’ will scan channels alphanumerically by
channel address.
3. Press Enter.
By keyboard hot-key sequence
The following key sequences control scanning.
34
Turning Scanning
On and Off