User guide

AutoView 424 Installer/User Guide
26
7. Choose the ‘Access Setup’ heading. Here, you will see a listing of all
attached servers in the channel list. For each server, choose a level of
access for this user by selecting one of the function keys listed on the
screen: F5 for no access, F6 for video only or F7 for video and keyboard/
mouse capability. The default is set for full access. All changes go into
effect as soon as they are made. Press Enter when you have completed
your configuration.
8. Press Enter to accept your selections and repeat steps 3-7 for each
remaining user.
Remote User
The AutoView 424 supports both PS/2 and Sun peripherals at the remote
user location. Use this menu option to select the peripherals that are
appropriate to your remote setup.
Switch Selection
Depending on your particular installation, you may not want unpowered
computers to be accessible. If Switch Selection is toggled to “All Channels” the
AutoView 424 will switch to a connected system regardless of power state. By
default, the AutoView 424 will only switch to systems that are powered on.
Setup Port Operations
Cybex offers enhancement products that allow you to customize the AutoView
424 through the setup port. Features include automated OSD programming
via the OSD Configuration Utility and FLASH Upgrades. Depending on the
application, you may be asked to enable the setup port in the instructions
that come with your AutoView 424 enhancement.
FLASH Upgrades
FLASH Upgrading allows you to update the code that runs your AutoView
424 and keep it current with the latest firmware revisions. For more
information, see Appendix B.