User guide

AutoView 424 Installer/User Guide

The ID Window appears when you change channels and displays the name

of the selected channel. This window can be individually configured for each

channel in your system. The characteristics of the ID Window can be changed

from the Edit Channel Menu. This option is only available if you are operating

in non-secure mode or if you are the system administrator.

Changing the Size, Color and Position of the ID Window

1. Highlight the channel you wish to change in the main OSD Window.

2. From the main OSD Window, press the Control key twice to access the

Command Menu or press F3. (If you press F3, skip Step 3)

2. Select ‘Edit Channel’ from the Command Menu.

3. Choose the option ‘ID Setup.’

Follow the procedures outlined in the table below to change the size, color

or position of your ID Window.

The ID Window

Operation Procedure

Move the ID Window Use the arrow keys to move the ID Window's

position on the monitor. (Hold down the SHIFT

key to move slower.) If the window flickers but

does not move, continue tapping the arrow keys

until it moves back into range.

Change window background color Press the <PAGE UP> key to cycle through the

available window background colors.

Change text color Press the <PAGE DOWN> key to cycle through

the available text colors.

Change window length Use the (+) and (-) keys to change the length of

the ID Window.

Change window size Press SPACE to toggle between large and small.

ID Window Help Press F1