User guide

21
Editing Channel Names and Addresses
1. Highlight the channel you wish to change in the main OSD Window.
2. Press the Control key twice to access the Command Menu or press the
F2 key once. (If you press F2, skip Step 3.)
3. Select ‘Edit Channel’ from the Command Menu.
4. Enter the new channel name, address, ID Dwell time and Scan Dwell
time. Press Enter to accept.
5. After selecting “ID Setup”, use the arrow keys to position the ID window
where you would like it to appear when this channel is selected. Then
press Enter. (For further information see ‘The ID Window’ later in
this chapter.)
6. Select “Save Changes” and press Enter to accept.
Press Esc at any point to exit this operation without saving the changes.
Deleting an Existing Channel
1. Highlight the channel you wish to delete in the main OSD Window.
2. Press the Control key twice to access the Command Menu or simply
press the DELETE key. (If you press DELETE, skip Step 3.)
3. Choose the ‘Delete Channel’ option.
4. Type Y or N at the prompt to confirm the deletion and press Enter.
On-Screen Display Operations