Service manual

F. For Modular configuration only, see step 4 of the Modular Center Post installation instructions,
part number 55600.
6. Install weight stack (see steps 6A - 6O, Figures 13 - 15).
A. Locate the half weight peg (#67), BHSCS .25-20 x .75 (#84) and split lockwasher (#82) from
the column hardware pack shown in Figure 5.
B. Install the half weight peg (#67) as shown in Figure 13.
Figure 13
C. Locate the top weight package and verify the contents. See Figure 14.
63 1 4700-010 Top Weight Assembly
63B 1 4700M005 Rubber Boot
63C 1 4700-307 Top Weight 20-4 x 12
63E 1 5310P044 Weight Selector Pin
63G 1 C-ZA00200 Half Weight
63H 1 HP286819 Spiral Pin
ITEM QTY PART NO. DESCRIPTION
Figure 14
84
82
67
63C
63B
63H
63E
63G
Cybex Modular Owner’s Manual
Page 4-38