Service manual

F. For Modular configuration only, see step 4 of the Modular Center Post installation instructions,
part number 55600.
6. Install weight stack (see steps 6A - 6M, Figures 14 and 15).
A. Locate the half weight pin (#61), BHSCS .250-20 x .75 (#75) and split lockwasher (#73) from
the column hardware pack shown in Figure 5.
B. Install the half weight peg as shown in Figure 14.
Figure 14
C. Locate the top weight package and verify the contents. See Figure 15.
2 1 4800-250 Top Weight Assembly
8 1 HP286819 Spiral Pin
12 1 4700M005 Rubber Boot
14 1 5310P044 Weight Selector Pin
21 1 C-ZA00200 Half Weight
ITEM QTY PART NO. DESCRIPTION
Figure 15
75
73
61
2
12
8
14
21
Cybex Modular Owner’s Manual
Page 4-17