Service manual

D. For the Tandem configuration, attach both columns to frame as shown in the Tandem Center
Post & Dome Installation instruction sheet.
E. For the Modular configuration, install angle braces onto each column. See the exploded-view
diagram shown in the Modular Center Post Installation Instruction sheet
5. Install the Leg Press Assembly to the appropriate configuration (see steps 5A - 5F and
Figures 11 - 13B).
A. Locate the Leg Press assembly and hardware pack.
B. Verify contents of hardware pack. See Figure 11.
Figure 11
13 2 HN784000 Hex Nut .50-13
29 2 JC702820 SHCS .375-16 x 1.25
37 2 JC780420 BHSCS .50-13 x 1.25
41 1 PP090211 Plastic Insert 1.500 Sq x 10-14 G
50 2 JC700917 FHSCS .375-16 x 1.00
57 2 JS388300 Split Lockwasher .500
77 2 PN660201 Hole Plug
ITEM QTY PART NO. DESCRIPTION
37
50
29
77
57
13
41
Cybex Modular Owner’s Manual
Page 4-15