Service manual

5601 - Lat Pulldown
1 1 01048 Seat Support
2 1 01069 Adjusting Post
3 2 JC780422 BHSCS .50-13 x 1.50
4 6 JS388300 Split Lockwasher .50
5 4 HN784000 Hex Nut .50-13
6 1 4000M218 Detent Pin
7 1 PP080202 Plastic Insert
8 1 01054 Pulley Mount
9 4 GP000004 Pulley Spacer
10 2 GP000203 Pulley Center
11 2 GP000000 Pulley Assembly
12 4 HC700414 BHCS .375-16 x .62
13 1 JC782838 SHCS .50-13 x 3.50
14 1 PP090200 Plastic Insert
15 1 01055 Scuff Plate
16 4 01066 Plastic Fastener
17 2 01755 Guide Rod Collet
18 2 5310M035 Weight Stack Guide Rod
19 2 PR060005 Weight Bumper
20 2 JC782830 SHCS .50-13 x 2.50
21 2 PP080204 Plastic Cap .625 ID x .68 OD
22 2 01239 Spacer
23 4 PN660201 Hole Plug
24 1 4700M005 Rubber Cap
25 1 4700-010 Top Weight Assembly
• 26 Removed
• 27 19 4005C062 Stack Weight 4 x 12
28 1 HP286819 Spiral Pin
29 2 JC700917 FHSCS .375-16 x 1.00
30 4 JC700922 FHSCS .375-16 x 1.50
• 31 2 4700-019 Flange Bearing
• 32 2 BR030206 Retaining Ring
33 1 JC782834 SHCS .50-13 x 3.00
34 Removed
35 1 02106 Half Weight Peg
36 1 HS308300 Split Lockwasher .25
37 1 JC620415 BHSCS .25-20 x .75
38 1 4800-024 Seat Cushion
39 2 4800-071 Thigh Cushion
40 1 01065 Placard Decal
41 1 4000Y316 Caution Decal
42 1 02521 Warning Decal
43 Removed
44 1 4800-381 General Warning Decal
45 1 01063 Cable Subassembly
46 1 5310P044 Weight Selector Pin
47 1 C-ZA000200 Half Weight
48 1 02224 Modular Screen (not shown)
ITEM QTY PART NO. DESCRIPTION
• FOR UNITS MANUFACTURED PRIOR TO JUNE 1993, CALL 1-888-462-9239.
Assembly Notes
1. Keep all shipping packages near area of installation. Standard items incude:
• Lat Column Assembly - 5601-98 • Top Weight Package - 4700-010 (black)
• Lat Pulldown Package - 5601-50 • Weight Pack 1 - 4700S040 (black)
• Lat Pulldown Cushion Box Assembly - 4005A070-0 • Weight Pack 2 - 4700S043 (black)
NOTE: x denotes specific color
2. When installing seat support, tip 90 degrees and insert through column slot. NOTE: Remove lower cross braces
(if installed) before installing seat support. Use hardware supplied with the Center Post to secure seat
support to lower cross braces.
3. Securely tighten seat support before installing weight stack.
4. Follow the assembly guidelines listed on either the 5600 Modular Center Post Assembly & Parts instruction sheet
or the 5629 Tandem Center Post Assembly & Parts instruction sheet.
49 1 01255 Handle Subassembly
50 2 GQ000206 Snap Link
51 1 4005-105 Pulldown Bar (not shown)
52 1 3900-426 Vortex Decal
53 1 4800-515 Weight Plate Decal
54 2 4800-101 Wear Cover
55 2 5310M042 Foam Grip
56 2 PR400201 Foam Grip (not shown)
57 2 HS760106 Flat Washer 1.75 .69 .14T
58 1 BS070201 Com Spring .56 x .66 x 1.50 LG
59 1 PP460200 Plastic Knob
ITEM QTY PART NO. DESCRIPTION