Owner`s manual
Cybex 770T-CT Treadmill Owner’s Manual
9
Safety
IMPORTANT: Read all instructions and warnings before using the treadmill.
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for the
site match the voltage of the treadmill that has been received. The power requirements for the Cybex
770T-CT Treadmill include a grounded, dedicated circuit, rated for one of the following:
100 VAC, 50/60 Hz, 20A•
115 VAC, 60 Hz, 20A•
208 VAC, 60 Hz, 15A•
220 VAC, 60 Hz, 15A•
230 VAC, 50 Hz, 13A, UK•
240 VAC, 50 Hz, 15A•
See the front warning decal for the voltage requirements of the treadmill.
WARNING: Do not attempt to use this unit with a voltage adapter. Do not attempt to use
this unit with an extension cord.
WARNING: Do not plug more than one unit into a single circuit.
Grounding Instructions
This treadmill must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
DANGER: Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualied electrician or service provider
if there is doubt as to whether the treadmill is properly grounded. Seek
a qualied electrician to perform any modications to the cord or plug.
Cybex is not responsible for injuries or damages as a result of cord or plug
modication.