Owner`s manual

Cybex 770T-CT Treadmill Owner’s Manual

Insert the CSAFE coupler into the mounting plate by hooking the lower tab into the mounting 7.

plate and snapping in the upper tab.

Mounting

Plate

Upper Tab

Lower Tab

CSAFE

Coupler

Installed

Plug the CSAFE cable into the CSAFE coupler on the front of the unit.8.

Install shield.

Using a Philips screwdriver install the seven screws securing the shield to the base.1.

Screws

(7)

Shield

Attach the front covers.

Perform steps 1 and 2 if you removed the front cover. If not, skip to step 3.

Locate the front cover and four screws removed on page 24.1.

Front Cover

Screws (4)

Using a Philips screwdriver install, but do not fully tighten the four screws securing the front 2.

cover to the base.