Owner`s manual

Cybex 770T-CT Treadmill Owner’s Manual
30
Install optional A/V or CSAFE cables.
The 770T-CT may have A/V or CSAFE cables depending on conguration.
Locate the optional A/V cable.
1.
Unthread the nut at the end of the A/V cable.2.
A/V
Cable
Nut
Insert the A/V cable into the D-shaped hole into the mounting plate on the front of the unit.3.
A/V
Cable
CSAFE Cable (Red)
Nut
Mounting
Plate
CSAFE
Coupler
D-Shaped
Hole
Hand thread the nut removed in step 2 onto the A/V cable.4.
Using a 14 mm open end wrench, secure the A/V cable to the mounting plate on the front of 5.
the unit.
Locate the optional CSAFE cable and CSAFE coupler. The CSAFE cable is red.6.