Owner`s manual

Cybex 770T-CT Treadmill Owner’s Manual
28
Display Cable
Enters Here
Hole
Place the console assembly in position on the bolts installed in step 3 in the left and right 6.
uprights.
Hand thread six bolts, into the remaining holes of the right upright and left upright.7.
Bolt
Upright
Console
(Right side shown)
Using the 7/32” Allen wrench, fully tighten all of the bolts.8.
Connect the Display Cable.
The display cable and CSAFE cable have the same connectors. The display cable is black, the
CSAFE cable is red.
Route the cables under all other cables and towards the base plate.