Owner`s manual

Cybex 770T-CT Treadmill Owner’s Manual
26
Install the uprights.
Locate two standoffs short and long.1.
Using a 3/4” open end wrench, secure the standoffs short and long to the right side of the 2.
base.
Short
Long
Base
Front of Unit
Locate the right upright and two bolts.3.
Bolt
Upright
Base
Hand thread two bolts into the base. Do not fully thread bolts into the base.4.
Carefully place the right upright onto the base assembly and the bolts installed in the previous 5.
step.
Hand thread four bolts into the right upright.6.