Owner`s manual

Assembly and Setup
Page 2–15
Cybex 750C/750R Owner’s Manual
9-Default Level Mode Levels DEFAULT LVL 1 – 21 (LVL 1 is default)
10-Target RPM For Advanced Programs TARGET RPM 10 - 100 (RPM 60 is default.)
11-Sound TONE = ON (default)
TONE = OFF
12-Dormant Style Defi nes what is
displayed in Dormant
Mode
0 – DEFAULT (factory default)
1 – TEXT MSG
2 – OUT OF ORDER
3 – CLOCK
4 – PROFILES
13-Dormant Text ENTER allows editing
and viewing.
DORMANT MSG 1
DORMANT MSG 2
DORMANT MSG BOTH
14- Active Mode Text
on/off
ENTER allows editing
and viewing.
WORKOUT MSG ON (or OFF)
15-Lock Combination Requires correct entry
of combination. Allows
lock combination to be
enabled and edited.
Master factory code is
4300. Enter on fi rst set
up.
ENTER OLD CODE (Key in 4-digit code)
CODE _ _ _ _ ON (or OFF) ENTER will allow code
to be seen. LOAD Control key toggles the lock on or
off.
Use keypad to enter a new code. ENTER accepts
new code.
Temporarily lock unit by pressing LOCK key (#5
LOCK) and enter 4-digit code. Unit will stay locked
until UNLOCKED is selected.
16-Custom Programs
SAVE
Gives user capability to
create and store custom
programs by enabling of
disabling SAVE button
during Review Mode.
SAVE PROG ON (or OFF). (factory default is OFF)
*MAX TIME ZONED If choice is ZONED, choose the actual time for each zone to start and maximum time
setting. NOTE: Current Time must be set for zones to work correctly.
HH:MM X is the actual time the zone starts, and YYY is the maximum time allowed during time zone.
Example:
Format Factory Default
ZONE1 HH:MM X YYY ZONE1 05:01A 60
ZONE2 HH:MM X YYY ZONE2 09:01A OFF
ZONE3 HH:MM X YYY ZONE3 04:01P 60
ZONE4 HH:MM X YYY ZONE4 09:00A OFF