Cybex 750C/750R Cycle Owner’s Manual Cardiovascular Systems Part Number LT-21613-4 E www.cybexinternational.
Cybex 750C/750R Cycle Owner’s Manual Cardiovascular Systems Part Number LT-21613-4 E Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. Polar® is a registered trademark of Polar Electro Inc. iPOD® is a registered trademark of Apple Inc. DISCLAIMER: Cybex International, Inc. makes no representations or warranties regarding the contents of this manual.
Table of Contents Front Pages About this Manual . . . . . . . . . . . . . . . . . . iii FCC Compliance Information. . . . . . . . . . iii 1 2 3 Safety Grounding and Voltage Information . . . . Important Safety Instructions . . . . . . . . . . Warning and Caution Decals . . . . . . . . . . Warning and Caution Decals - 750C . . . Warning and Caution Decals - 750R . . . CSAFE Ports . . . . . . . . . . . . . . . . . . . . . . . 1-1 1-2 1-4 1-4 1-7 1-10 Assembly and Setup Warnings and Cautions . . . . . . .
Page ii
About This Manual An owner’s manual is shipped with each unit. To purchase additional copies of this manual or any other Cybex manual, see Chapter 5 – Customer Service for Cybex contact information. To contact Cybex with comments about this manual, email techhelp@cybexintl.com.
Page iv
Cybex 750C/750R Owner’s Manual 1 – Safety IMPORTANT: Read all instructions and warnings before using. Grounding and Voltage Information DANGER: Improper connection of equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service provider if in doubt as to whether the unit is properly grounded. For Optional Power Supply Unit must be grounded. This unit is equipped with an optional equipment-grounding conductor cord and a grounding plug.
Cybex 750C/750R Owner’s Manual Important Safety Instructions (Save These Instructions) DANGER: To reduce the risk of electrical shock, always unplug unit from electrical outlet immediately after use and before cleaning. WARNING: Serious injury could occur if these listed precautions are not observed. Follow precautions to reduce the risk of burns, fires, electric shock or injury. User Safety Precautions • Obtain medical exam before beginning any exercise program.
Cybex 750C/750R Owner’s Manual Facility Safety Precautions NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is performed. • Enforce all user and safety precautions. • Read and understand the Owner’s Manual completely before assembling, servicing or using unit. • Verify all users are properly trained on using the equipment. • Do not use unit outdoors. • Verify that each unit is setup, leveled and operated on a solid, level surface.
Cybex 750C/750R Owner’s Manual Warning and Caution Decals Warning decals indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury. Carefully read and understand the following caution and warning labels before using the unit.
Cybex 750C/750R Owner’s Manual Internal View WARNING Hot flywheel! Wait until it cools before servicing. DE-17155-4 A Warning decal part number DE-18363-4 CAUTION Moving parts. Keep hands away when in use. DE-17219-4 A Warning decal part number DE-18362-4 NOTE: These decals are located inside the cycle, applied to the brake/generator.
Cybex 750C/750R Owner’s Manual WARNING All maintenance activities shall be performed by qualified personnel. Failure to do so could result in serious injury. Warning decal part number DE-21735-4 NOTE: Decal located inside cover.
Cybex 750C/750R Owner’s Manual Warning and Caution Decals - 750R Warning decal part number DE-21590-4 Safety Page 1-7
Cybex 750C/750R Owner’s Manual Internal View CAUTION Moving parts. Keep hands away when in use. WARNING Hot flywheel! Wait until it cools before servicing. DE-17155-4 A DE-17219-4 A Warning decal part number DE-18362-4 Warning decal part number DE-18363-4 NOTE: This decal is located inside the cycle, applied to the brake/generator.
Cybex 750C/750R Owner’s Manual WARNING All maintenance activities shall be performed by qualified personnel. Failure to do so could result in serious injury. Warning decal part number DE-21735-4 NOTE: Decal located inside cover.
Cybex 750C/750R Owner’s Manual CSAFE Ports The CSAFE standard defines a communication protocol and low-voltage DC power source specific to the Fitness Equipment Industry. These RJ-45 phone jacks are provided for use ONLY within the CSAFE protocol. For more information on CSAFE standard, visit www.fitlinxx.com/csafe. NOTE: The CSAFE port inside the console, accessible through the back cover, is the only port that carries BOTH the CSAFE communication lines and the 8.0v DC CSAFE power supply.
Cybex 750C/750R Owner’s Manual 2 - Assembly and Setup Warnings and Cautions Read and understand all warnings and cautions listed in Chapter 1 – Safety before assembling unit. Use extreme caution when assembling the unit. Failure to do so could result in injury or death. WARNING: Always use proper lifting methods when moving heavy items. Be sure all electrical requirements are met as indicated in the specifications in Chapter 1 – Safety and as listed in this chapter.
Cybex 750C/750R Owner’s Manual Unit Assemby WARNING: Use extreme caution when assembling the unit. Failure to do so could result in injury. WARNING: Always use proper lifting methods when moving heavy items. Tools Required • • • • 3/16” Allen wrench (supplied with 750R only) Phillips screwdriver 1/2” Socket wrench 9/16” Open end wrench NOTE: The words “left” and “right” denote the user’s orientation. 1. Read and understand all instructions thoroughly before assembling the unit. 2.
Cybex 750C/750R Owner’s Manual Item 1 2 3 4 5 6 7 8 9 10 10 Qty 1 1 1 1 1 1 1 1 1 1 1 Part Number Varies Varies PL-21584 PL-21581 PL-21582 PL-21583 AX-21698 LT-21613-4 LT-21615 LT-21621 LT-21622 #7 Description Base with covers attached Console assembly Back Cap Front Left Cover Front Right Cover Top Cap Hardware pack Owner’s Manual Assembly poster Warranty sheet, Consumer Warranty sheet, Commercial #8 #9 #10 #6 #4 #5 #3 #1 #2 Figure 1a Assembly and Setup Page 2–3
Cybex 750C/750R Owner’s Manual Item 11 12 Qty 4 6 Part Number HS-19108 HS-15706 Description Screw, 5/16-18 x .75”,HXHD,WHIZ-LOCK,GR5 Screw, 8-16 x .50”, PNHD Hardware #7 #11 #12 #2 #12 #6 #11 #3 #12 #12 #4 #5 #1 #12 Figure 1b WARNING: Always use proper lifting methods when moving heavy items. 2. Lift and move the unit A. Firmly grasp the rear foot. B. Using proper lifting methods, lift the rear foot so the front transport wheels are able to roll on floor. C.
Cybex 750C/750R Owner’s Manual D. Carefully lower the rear foot so unit is in intended location. 3. Attach the console assembly to base assembly. NOTE: If installing the A/V option, refer to the 750C A/V bracket installation instructions (supplied with the A/V bracket). #2 A. Locate the console assembly (#2) and four mounting screws 5/16-18 x .75” (#11). See Figure 2. Optional A/V Cable B. Hand thread two mounting screws 5/16-18 x .75” (#11) into the base assembly. See Figure 3.
Cybex 750C/750R Owner’s Manual 4. Install the front covers. A. Locate and place the front left cover (#4) on the front of the unit as shown in Figure 5. Plastic Connectors B. Using a Phillips screwdriver, secure with one screw 8-16 x .50” (#12). #12 NOTE: In addition to the mounting screws, there are four plastic connectors that secure the front covers together. Ensure that all four plastic connectors are inserted properly in each front cover. See Figure 5. C.
Cybex 750C/750R Owner’s Manual 6. Install the back cap. A. Locate and place the back cap (#3) into the top cap as shown in Figure 7. NOTE: Ensure the back cap is fully inserted into the top cap. B. Using a Phillips screwdriver, secure with two screws 8-16 x .50 (#12). See Figure 7. #12 7. Level the unit. A. Confirm that the unit is on a level surface. If not, use a 9/16” open-end wrench to adjust the leveling feet up or down. See Figure 8. #3 8. Visually inspect the unit. A.
Cybex 750C/750R Owner’s Manual 750R Assembly 1. Unpack and verify contents of the unit. A. Verify the following items are present. See Figure 1a and 1b. Check off each item as found. See Chapter 5 - Customer Service for contact information if any parts are missing.
Cybex 750C/750R Owner’s Manual Item 11 12 13 14 15 Qty 4 4 6 4 1 #7 Part Number HS-19108 HW-53018 HS-15706 HS-41107 HX-00438 #11 Description Screw, 5/16-18 x .75”,HXHD,WHIZ-LOCK,GR5 Washer, 5/16” Split Screw, 8-16 x .50”, PNHD, BLK Screw, 5/16-18 X 1.
Cybex 750C/750R Owner’s Manual WARNING: Always use proper lifting methods when moving heavy items. 2. Lift and move the unit A. Firmly grasp the rear foot. B. Using proper lifting methods, lift the rear foot so the front transport wheels are able to roll on floor. C. Move or roll unit to intended location. 3. Install the seat back assembly. A. Locate the seat back assembly (#5) four screws 5/16-18 x 1.50” (#14) and four washers 5-16” (#12). See Figure 2. #5 B.
Cybex 750C/750R Owner’s Manual C. Place the console assembly (#2) in the correct position on the base assembly (#1) by sliding into position onto the two mounting screws 5/16-18 x .75” (#11). See Figure 4. #2 #11 D. Hand thread the other two screws 5/16-18 x .75” (#11). See Figure 3. #1 E. Securely fasten the four screws 5/16-18 x .75” (#11) with a 1/2” socket wrench. NOTE: Ensure cable connectors click together and are securely fastened. Figure 4 F.
Cybex 750C/750R Owner’s Manual C. Locate and place the front left cover (#3) on the front of the unit as shown in Figure 7. D. Using a Phillips screwdriver, secure with three screws 8-16 x .50” (#13). See Figure 7. Plastic Connectors 6. Install the accessory tray. A. Locate the accessory tray (#6). See Figure 8. B. Using a Phillips screwdriver, remove the two screws in the console assembly (#2). C.
Cybex 750C/750R Owner’s Manual WARNING: Be sure that all electrical requirements are met as indicated in the specifications at the front of the manual and at the beginning of this chapter prior to proceeding. Testing the Operation Use the following instructions to test the full resistance of the unit. 1. Plug the optional power cord into a power outlet from a grounded circuit as described under Electrical Requirements in this chapter.
Cybex 750C/750R Owner’s Manual Setup Setup is a separate control screen that allows the user to define multiple aspects of the unit’s functions. Set up can be accessed from Dormant mode, Count Down, Lock and the CSAFE ID Entry screens. To access setup screen, enter key sequence “Clear-7-5-0” and press ENTER. Press ENTER to enter setup feature, allow changes and return to main menu. Pause/End can also be used to reset (TV off, Load to 0, unlatch battery) and exit to Dormant mode.
Cybex 750C/750R Owner’s Manual 9-Default Level Mode Levels 10-Target RPM For Advanced Programs TARGET RPM 10 - 100 (RPM 60 is default.) DEFAULT LVL 1 – 21 11-Sound (LVL 1 is default) TONE = ON (default) TONE = OFF 12-Dormant Style Defines what is displayed in Dormant Mode 0 – DEFAULT (factory default) 1 – TEXT MSG 2 – OUT OF ORDER 3 – CLOCK 4 – PROFILES 13-Dormant Text ENTER allows editing and viewing.
Cybex 750C/750R Owner’s Manual This page intentionally left blank Assembly and Setup Page 2–16
Cybex 750C/750R Owner’s Manual 3 - Operation Intended Use The intended use of this exercise equipment is to aid or improve general physical fitness and exercise. Terms Used Active Mode – Any time unit is controlling resistance and accumulating workout data. Active Mode begins after hitting QUICK START during the initial count-down screen, after completing the setup for a program or by default if the initial count-down screen times out and enters Quick Start Manual mode.
Cybex 750C/750R Owner’s Manual Read and understand all warnings and cautions in Chapter 1 – Safety and all operation instructions in this chapter before operating unit. Mount and Dismount WARNING: Wait until all moving parts come to a complete stop before mounting or dismounting. To mount unit safely: 1. Verify unit is in Dormant Mode and pedals are completely stopped. 2. Grasp handrail and step carefully onto pedals. To dismount unit safely: 1. Wait until pedals come to a complete stop. 2.
Cybex 750C/750R Owner’s Manual Console Keys Control keys on the display are usable during operation and may be pressed at any time to make adjustments in level, data readouts and fan speed. See Figure 1.
Cybex 750C/750R Owner’s Manual Console Keys Description PROGRAMS Program Setup Mode Choose from nine programs or nine custom programs MANUAL Manual Mode Go directly to Manual Mode set up ADVANCED Advanced Programs Access advanced program options SHIFT/SCAN Auto-scan Press to disable auto-scan and hold whatever is being displayed. If auto-scan is on, press to toggle the data display.
Cybex 750C/750R Owner’s Manual Audio Visual (AV) Key Pad – Optional Figure 2 Console Key Description EPG If an Electronic Program Guide (EPG) is available, this will be displayed on the TV. Use the CHANNEL Λ V and VOLUME < > keys to navigate in the EPG, ENTER to accept any selections, and CLEAR/EXIT to exit the EPG mode. CHANNEL Toggle down or up to change channel (beeping will occur). VOLUME Press appropriate keys to increase or decrease volume. There is no display interaction.
Cybex 750C/750R Owner’s Manual Program Selection There are nine different pre-programmed options from which to choose. For a complete description and profile of each program (P1-P8) see Appendix B. Program Levels Settings P1 Weight Loss 21 Select time, level and weight. P2 Rolling Hills 21 Select time, level and weight. P3 Hills 21 Select time, level and weight. P4 Pike’s Peak 21 Select time, level and weight. P5 Ramps 21 Select time, level and weight.
Cybex 750C/750R Owner’s Manual 4. For P9 - HRC Program only: • Using the number keypad, key in user’s accurate age when Text Area prompts ‘ENTER YOUR AGE TO CALCULATE TARGET HEART RATE”. Valid age range values are 13 - 113. • Adjust target heart rate when Text Area scrolls “75% = XXX BPM” and “TARGET BPM AT 75% = XXX BPM”. NOTE: Target Heart rate is calculated at 75% of Max, where Max Heart rate is calculated at 220 minus the user’s age.
Cybex 750C/750R Owner’s Manual A2 – Isokinetic Program Setup 1. Press ADVANCED programs key. 2. Scroll to (or key in) #2. 3. Select time. 4. Use LEVEL control keys + - to adjust Revolutions per Minute (RPM). Choices are 15 - 150 in increments of five. 5. Adjust level for scale when “LEVEL XX” and “DISPLAY SCALE YY - ZZZ” appear in the Text Area. 6. Enter user’s accurate weight. A3 – Fitness Test Setup 1. Press ADVANCED programs key. 2. Scroll to (or key in) #3. 3.
Cybex 750C/750R Owner’s Manual Fitness Test Review Once the Fitness Test completes, it calculates and displays a fitness review outcome based on performance during the fitness testing period. The bar graph displays “TEST” while the text area scrolls “FITNESS TEST PREDICTED VO2 MAX = XXX”. See Figure 3. Alternating with the above message is the standard review for Distance, Calories and acquired BPM.
Cybex 750C/750R Owner’s Manual Custom Programs A maximum of nine custom programs can be created from any workout session. The unit automatically records resistance and time segment changes. Custom programs can only be created, stored and played back as Constant Power (like the Factory Programs or Advanced Program A1). In creating a custom program from Manual Mode (which simulates a bike in using gears 1-21) the actual power used during the transition of each minute of the workout session is saved.
Cybex 750C/750R Owner’s Manual Rotation Per Minute (RPM) – User’s crank rotations per minute. Calories – The total accumulated calories burned during workout. WATTS – Present workload energy exertion. Metabolic Equivalent (METs) – Displayed only if no BPM signal is present. A MET is the metabolic equivalent to the energy expended by the human body at rest. Anything over one MET is considered exertion. METs are calculated by the display and updated every 1 – 1.2 seconds. METs = Cal/Hr X 2.
Cybex 750C/750R Owner’s Manual Fan Control The fan defaults at the “OFF” setting. The user can change to “LO” or “HI” setting by pressing the appropriate control key. NOTE: User must be pedalling for fan to operate. Alarm Set To set up an alarm to sound during workout: 1. Press key #8 on the keypad, also labeled with an alarm clock icon. Text Area will display “ALARM AT HH:MM Y”. Initially, this display reflects actual time. 2. Use keypad to enter a direct time.
Cybex 750C/750R Owner’s Manual 4 – Preventive Maintenance Warnings Read all warnings in this chapter and in Chapter 1 – Safety. Observe the following warnings and cautions: All maintenance activities shall be performed by qualified personnel. Failure to do so could result in serious injury. To prevent electrical shock, verify unit is unplugged from the electrical outlet before performing any cleaning or maintenance procedures. NOTE: A charge can remain after unplugging the power cord.
Cybex 750C/750R Owner’s Manual Statistics The Statistics screen allows tracking of equipment usage. Open Statistics screen from Count Down, Lock, CSAFE ID Entry or Dormant Modes Press Clear Key 9-9-9 Press ENTER Data features can also be accessed from the CSAFE port. Use the ENTER key to advance to next screen. Use the Load Control Keys to scroll forward or backward in the menu. Statistics Menu Display ST1 – REVOLUTIONS REVS YYYYYYY 0.0 – 999,999.
Cybex 750C/750R Owner’s Manual ERROR NUMBER 27 — LOW BATTERY Cause: Battery voltage is reported to be below the limit of 10.7v DC and the controller has issued the low battery warning. Reset/Remedy: Further use will re-charge battery and the error condition will be cleared automatically. Rechargeable Battery The unit is designed with a 12 volt Lead-Acid rechargeable battery. The battery will recharge during regular operation of unit or when the optional power adapter is plugged in.
Cybex 750C/750R Owner’s Manual This page intentionally left blank Preventive Maintenance Page 4-4
Cybex 750C/750R Owner’s Manual 5 - Customer Service Contacting Service Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. Find information on the web at www.cybexinternational.com or by e-mail at techhelp@cybexintl.com.
Cybex 750C/750R Owner’s Manual Ordering Parts Fax orders to 508-533-5183. To speak with a customer service representative, call 888-462-9239 (for customers living within the USA) or 508-533-4300 (for customers outside the USA). CAUTION Use only Cybex replacement parts when servicing. Failure to do so could result in personal injury. Cybex will void warranty if non-Cybex replacement parts are used.
Cybex 750C/750R Owner’s Manual Damaged Parts Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility of the carrier (UPS, Federal Express, trucking companies, etc.). Apparent Damage - Upon receipt of shipment, check all boxes carefully. Any damage seen with a visual check must be noted on the freight bill and signed by the carrier’s agent. Failure to do so will result in the carrier’s refusal to honor the damage claim.
Cybex 750C/750R Owner’s Manual This page intentionally left blank Customer Service Page 5-4
Cybex 750C/750R Owner’s Manual Appendix A - Technical Specifications Length: Width: Height: Weight of Product: Shipping Weight: Resistance Levels: Programs: Console Features: Heart Rate Features: Frame Colors: Resistance Range: Maximum User Weight: Power: Connectivity: Power Supply: Other: Options: 750C Cycle, 48” (123 cm). 750R Cycle, 65” (165 cm). 750C Cycle, 23” (58 cm). 750R Cycle, 24” (62 cm). 750C Cycle, 60” (154 cm). 750R Cycle, 49” (125 cm). 750C Cycle, 143 lbs. (65 kg). 750R Cycle, 166 lbs.
Cybex 750C/750R Owner’s Manual This page intentionally left blank Technical Specifications Page A-2
Cybex 750C/750R Owner’s Manual Appendix B – Program Overviews Warm Up and Cool Down Most fixed programs start with a two minute warm-up period and two minute cool-down period. If transitioned into from another program or from Manual mode, the warm-up period is skipped and the core of the new program is used. Cool-down can also be activated by pressing the COOL DOWN button at anytime. See Figure 1.
Cybex 750C/750R Owner’s Manual P1 Weight Loss The Weight Loss program is designed for low to medium intensity training that the user can sustain for an extended period of time. It uses a low intensity resistance baseline for its two and a half minute core program with forty-five second periods of higher resistance. The constant variety provides for periods of higher expenditure and training effect without the introduction of undue fatigue allowing the user to perform for longer periods of time.
Cybex 750C/750R Owner’s Manual P2 Rolling Hills The Rolling Hills program is a two and a half-minute core program designed to give the users the experience of riding constantly rolling hills without the steep grades of the Hills program. Users will ride at a lower intensity with twice as much time spent at each resistance level and a two-minute rest period before the core program repeats. See Figure 3.
Cybex 750C/750R Owner’s Manual P3 Hills The Hills program is a three-minute core program designed to give the user an intense interval workout. Users will experience intervals of moderate resistance at the beginning to simulate the start of the climb and will deliver peak resistance after two and a half minutes. The resistance then returns to the preliminary level and the core program repeats itself. See Figure 4.
Cybex 750C/750R Owner’s Manual P4 Pikes Peak Pikes Peak is a three-minute fifteen-second core program that begins at a low intensity level and incrementally climbs to peak resistance after one and a half-minutes and remains at that level for 45 seconds before ramping back down to the initial level. The repetitive program is designed to keep the user in an aerobic state before reaching their anaerobic threshold. See Figure 5.
Cybex 750C/750R Owner’s Manual P5 Ramps The Ramps program is a three-minute forty-five second core program with a progressively increasing resistance profile designed to encourage the user to work towards their anaerobic energy system. The first three stages are forty-five seconds each and with the last three at thirty seconds each ending with the final stage at peak resistance. The resistance then returns to the preliminary level and the core program repeats itself. See Figure 6.
Cybex 750C/750R Owner’s Manual P6 Interval 1:2 The Interval program uses a 1:2 work to rest ratio. It is designed for high resistance training with longer rest periods. Users will face a high level of resistance for thirty-seconds followed by a one minute recuperation period before performing the interval again. See Figure 7.
Cybex 750C/750R Owner’s Manual P7 Strength The Strength program is designed with the specific goal of raising the users’ lactic acid threshold. The program uses a 1:3 work to rest ratio with fifteen-second intervals for maximum power development and forty-five second rest periods for recuperation. See Figure 8.
Cybex 750C/750R Owner’s Manual P8 Cardio The Cardio program is designed to maintain a high total demand with one minute at peak resistance out of the total two and a half minute core program. The prolonged exertion period takes advantage of the long term energy stores and total aerobic capability when associated with speeds that require a high sustained cardiovascular demand. Users will benefit from a forty-five second recuperation period before beginning the next interval. See Figure 9.
Cybex 750C/750R Owner’s Manual This page intentionally left blank.
Cybex 750C/750R Owner’s Manual Parts List Cybex 750C Cybex ITEM QTY 1 1 2 1 3 1 4 2 7 1 8 1 9 1 10 1 11 1 12 2 13 1 14 1 15 1 16 4 17 1 18 1 19 1 20 1 22 1 24 2 25 1 26 1 27 1 28 1 29 2 30 1 31 11 32 4 33 4 34 4 35 4 36 3 37 2 38 2 39 2 40 2 41 4 42 8 43 4 44 1 45 2 46 1 48 1 49 3 50 1 51 1 52 1 53 1 54 1 55 1 56 1 57 58 59 71 72 73 78 79 81 82 1 2 1 1 1 1 1 1 1 2 PART NO.
Cybex 750C/750R Owner’s Manual ITEM QTY PART NO.
Cybex 750C/750R Owner’s Manual Parts List Cybex 750R Cybex ITEM QTY PART NO.
Cybex 750C/750R Owner’s Manual ITEM QTY PART NO. 402 6 HN-19662 403 2 HS-11347 404 4 HS-13739 405 1 AW-20841 406 1 DE-22190 NS 1 AW-14007 NS NS NS NS NS NS NS NS NS NS NS NS NS 1 1 1 1 1 1 1 1 1 1 1 1 1 NS 1 NS 1 NS NS NS NS NS NS NS NS 1 1 1 1 1 1 1 1 DESCRIPTION NUT,LOCK FLG,1-4-20,ZN BOLT,1-4-20X0.75,SCHD BTN,BLK BOLT LCK,1-4-20X1.
Cybex 750C/750R Owner’s Manual Appendix D – Exploded Views Cybex 750C Cybex ITEM QTY. PART NO. DESCRIPTION 31 201 202 218 219 221 400 401 4 1 1 1 1 1 1 1 HS-15706 AD-20840 AF-21408 PL-20951 KAD-21926 SW-20813-X* AF-20959 CP-21072 401 1 CP-21073 402 403 404 405 406 4 2 4 1 1 HN-19662 HS-11347 HS-13739 AW-20841 DE-22190 SCREW,8-16X.50,PNHD PCA,PEM JACK BOARD BRKT,AV,LOWER CONSOLE,SMALL,TOP,A/V COVER,BOTTOM,AV MEMBRANE,750CR,AV KEYPAD WELDMENT,AV MOUNT MONITOR,13.3” ATSC DIGITAL PEM MONITOR,13.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION 16 17 18 19 20 31 71 72 73 78 79 81 82 83 84 85 211 212 218 219 221 225 226 INSERT,EXPANSION DUCT,FAN,RIGHT DUCT,FAN,LEFT CONSOLE,SMALL,FRONT CONSOLE,SMALL,BACK SCREW,8-16X.50,PNHD PCA,DISPLAY,750CR PCA,MCC,750CR PROGRAMMED PLATE,MOUNTING FAN,12VDC,120X120MM,CFM30 PCA,POLAR,SENSOR DIFFUSER, .60 OD DISC SCREW,8-16X.75,PNHD PHIL SCREW SEMS,M4X10MM,PNHD SCREW SEMS,8-32X1.25,PNHD SCREW SLFTP,8-16X.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION ITEM QTY. PART NO. DESCRIPTION 1 9 10 11 22 24 28 31 36 41 1 1 1 1 1 2 1 8 3 4 AD-21280 AX-21373 AX-21684 AX-21693 EC-21351 EH-00986 FS-21599 HS-15706 HS-19111 HS-21612 54 55 56 1 1 1 PL-21580 PL-21581 AX-21854 42 43 49 53 2 4 3 1 HS-41006 HW-21878 HX-21519 PL-21579 PCA,LOWER CONTROLLER ASSY,BATTERY ASSY,BRAKE ASSY,PLASTIC TOP,750C BATTERY,12V/1.2AHR,750C 750R TY WRAP,T B TYB-25M 9 IN COVER,LOWER CONTROLLER SCREW,8-16X.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION ITEM QTY. PART NO. DESCRIPTION 8 13 14 15 16 25 26 27 30 33 ASSY,IDLER ARM,750C 750R ASSY,LEFT CRANK BEARING ASSY,RIGHT CRANK BEARING BELT,POLY-V,480J8 INSERT,EXPANSION CRANK,RIGHT ARM CRANK,LEFT ARM SHAFT,CRANK NUT,7-8-24,LH,86A,ZN SCREW,SEMS,10-32X.38 37 38 44 45 46 48 59 300 301 BOLT,M8X1X20,SCHD BTN BOLT,M8X1X22,SCHD CAP WASHER,CRANK KEY WASHER,FLAT 17.2 X 21.5 X .
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION ITEM QTY. PART NO. DESCRIPTION 2 3 4 7 12 16 29 31 32 34 35 39 40 42 WELDMENT,FRAME,UPRIGHT WELDMENT,CONSOLE SUPPORT WELDMENT,LEVELER ASSY,SEAT POST ASSY,WHEEL,750C 750R INSERT,EXPANSION NUT 3-8-16 HEX STL ZINC SCREW,8-16X.50,PNHD BOLT SEMS,1-4-20X.5,PNHD SCREW,10-32X .50,PNHD SCREW 5-16-18X3-4LG,HXHD SCREW,#6-1/2 PNHD PHIL SCREW,#6-1 1/4 PNHD PHIL SCREW SLFTP,10-24X.
Cybex 750C/750R Owner’s Manual Cybex 750R Cybex ITEM QTY. PART NO. DESCRIPTION 31 201 202 218 219 221 400 401 4 1 1 1 1 1 1 1 HS-15706 AD-20840 AF-21408 PL-20951 KAD-21926 SW-20813-X* AF-20959 CP-21072 401 1 CP-21073 402 403 404 405 406 4 2 4 1 1 HN-19662 HS-11347 HS-13739 AW-20841 DE-22190 SCREW,8-16X.50,PNHD PCA,PEM JACK BOARD BRKT,AV,LOWER CONSOLE,SMALL,TOP,A/V COVER,BOTTOM,AV MEMBRANE,750CR,AV KEYPAD WELDMENT,AV MOUNT MONITOR,13.3” ATSC DIGITAL PEM MONITOR,13.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION 16 17 18 19 20 31 71 72 73 78 79 81 82 83 84 85 211 212 218 219 221 225 226 INSERT,EXPANSION DUCT,FAN,RIGHT DUCT,FAN,LEFT CONSOLE,SMALL,FRONT CONSOLE,SMALL,BACK SCREW,8-16X.50,PNHD PCA,DISPLAY,750CR PCA,MCC,750CR PROGRAMMED PLATE,MOUNTING FAN,12VDC,120X120MM,CFM30 PCA,POLAR,SENSOR DIFFUSER, .60 OD DISC SCREW,8-16X.75,PNHD PHIL SCREW SEMS,M4X10MM,PNHD SCREW SEMS,8-32X1.25,PNHD SCREW SLFTP,8-16X.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION 31 53 56 57 58 59 60 61 82 SCREW,8-16X.50,PNHD PIN,PLASTIC RETAINIER SHROUD,SHUTTLE,LEFT SHROUD,SHUTTLE,RIGHT SHROUD,FRONT LEFT,750R SHROUD,FRONT RIGHT,750R CAP,TOP LEFT,750R CAP,TOP RIGHT,750R, W/PINS SCREW,8-16X.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION 8 13 14 15 27 28 29 33 39 41 42 48 49 50 52 63 300 301 ASSY,IDLER ARM,750C 750R ASSY,LEFT CRANK BEARING ASSY,RIGHT CRANK BEARING BELT,POLY-V,480J8(1222 PJ8) CRANK,RIGHT ARM CRANK,LEFT ARM SHAFT,530C R,CRANK NUT,7-8-24,LH,86A,ZN SCREW,SEMS,10-32X.38 BOLT,M8X1X20,SCHD BTN BTN BOLT,M8X1X22,SCHD CAP WASHER,CRANK KEY WASHER,FLAT 17.2 X 21.5 X .
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION ITEM QTY. PART NO. DESCRIPTION 2 3 9 10 12 16 24 26 31 32 36 37 40 45 WELDMENT,FRAME,750R WELDMENT,LEVELER WELDNUT ASSY,SEAT SHUTTLE EXTR. ASSY,SEAT BACK,750R ASSY,WHEEL,750C 750R INSERT,EXPANSION CABLE TIE,3.9IN TY WRAP BASE SCREW,8-16X.50,PNHD NUT 3-8-16 HEX STL ZINC BOLT SEMS,1-4-20X.5,PNHD SCREW 5-16-18X3-4LG,HXHD SCREW,10-32X .50,PNHD SCREW SLFTP,10-24X.75,PNHD 46 55 62 66 67 70 74 207 213 223 224 303 304 BOLT,5-16X1.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION 1 11 23 24 25 26 30 34 43 47 54 91 92 93 209 210 PCA,LOWER CONTROLLER ASSY,BRAKE SHIELD IDLER,750R BATTERY,12V/1.2AHR CABLE TIE,3.9IN TY WRAP,T B TYB-25M 9 IN TY WRAP BASE CLAMP,BATTERY,750R SCREW SEMS,8-32X.38,PNHD SCREW,10-32X7-16,SCHD CAP,SS WASHER SAE NO.
Cybex 750C/750R Owner’s Manual ITEM QTY. PART NO. DESCRIPTION 31 121 122 124 125 126 129 130 131 132 134 135 136 138 139 140 141 142 143 144 145 146 147 148 149 150 151 SCREW,8-16X.50,PNHD WELDMENT,SHUTTLE HANDLE WELDMENT,SEAT SHUTTLE 750R ASSY,SEAT SHUTTLE WHEEL GRIP,HR TOP,IN-MOLDED,GRAY GRIP,HR BTM,IN-MOLDED,GRAY WHEEL,LOWER RIGHT,TAPERED WHEEL,LOWER LEFT,BEVELED SPACER,LOWER SHUTTLE WHEEL PLATE,WHEEL TENSION ADJ. KEPS,10-32 HEX STL ZN NUT,5-16-18,PREVAILING TORQUE NUT NYLOC .
Cybex 750C/750R Owner’s Manual Cybex 750C Schematic Page E-1
Cybex 750R Schematic Page E-2 Cybex 750C/750R Owner’s Manual
