Owner`s manual

Setup
and Assembly
Page 5-16
Cybex Arc Trainer 630A Owner’s Manual
8. Plug in AC/DC Adapter and coax cables.
A. Locate the AC/DC adapter (N) supplied with the monitor and plug into the power cable
exiting the base of the Arc.
B. Plug the power cord (O) into the AC/DC adapter (N). NOTE: Power cord (O) varies
by country.
C. Thread the antenna/cable source cable (supplied at the site location) into the coax
cable exiting the base of the Arc.
9. Set up monitor for first time use.
A. Locate the personal entertainment monitor manual (LT-20191) and follow the set up
procedure in Chapter 5.
B. Plug the power cord (O) into a wall outlet.
C. Plug headphones (not supplied) into headphone jack located at base of console.
D. Refer to Chapter 3 of the personal entertainment monitor manual (LT-20191) regarding
use of the channel and volume keys located on the lower center of the Arc console.
See Figure 27.
Figure 27
Channel
Keys
Volume
Keys
10. Continue on with Step 6 on page 5-6.