Service manual

ManualsBrandsCYBEX ManualsFitness Equipment600H HIKER

TABLE OF CONTENTS

1 INTRODUCING THE 600H HIKER BY CYBEX

Ergonomic Design 3

Warranty 3

Customer Service Hotline 4

2 DISASSEMBLY

Setup and Assembly 5

Choosing and Preparing a Site 5

Step 1 Removing the Shrouds 5

Step 2 Releasing Tension from the Linkage System 5

Step 3 Removing the Linkage System 6

Step 4 Disassembling the Tie Rod Assemblies 6

Component Parts of the Linkage System 7

Step 6 Removing the Pulley Assembly and Drive Belt 8

Step 7 Removing the Foot Plate 8

Step 8 Removing the Rear Pivot Arm Assembly 9

Step 9 Removing the Front Pivot Arm Assembly 9

Step 10 Removing the Front Linkage Assembly 10

3 INSTALLATION

Step 1 Installing the Front Linkage Assembly 11

Step 2 Installing the Front Pivot Arm Assembly 11

Step 3 Assembling the Short Linkage Rod Assembly 12

Step 4 Installing the Short Linkage Rod Assembly 13

Step 5 Installing the Rear Pivot Arm Assembly 14

Step 6 Assembling the Foot Plate Linage Rod 15

Step 7 Attaching a Foot Plate to the Front Pivot Arm Assembly 15

Step 8 Installing the Foot Plate Linkage Rod Assembly 16

Step 9 Assembling the Pulley Assembly 17

Step 10 Installing the Pulley Assembly 18

Step 11 Attaching the Drive Belt to the Foot Plate 18

Step 12 Installing the Long Linkage Rod Assembly 19

Step 13 Attaching the Drive Belt 19

Step 14 Attaching the Long Linkage Rod Assembly 20

Step 15 Installing the Long Linkage Rod Assembly 21

Step 16 Adjusting the Linkage System 22

Step 17 Adjusting the End of the Stroke 23

Step 18 Attaching the Shrouds 24

4 RETRO KIT INSTALLATION

Extract Calibration Settings 25

Display Panel Replacement 25

Replace Calibration Settings 26

Pulley Replacement 26

Error 3 27

5 DIAGNOSTICS

Display LED Test 28

Battery Test 28

Production Calibration Test 28

DVM Test 28

Static Diagnostic Check 29

6 DIAGRAMS

Parts List 30

Exploded View 31

Schematic 32