Specifications
49
Operation with multiple internal WIDE SCSI units
The CYBERSTORM PPC SCSI has to be connected to one of the middle plugs of the SCSI
cable. At every physical end of the WIDE SCSI cable a WIDE SCSI unit with activated
terminators is connected. Additional WIDE SCSI units with termination deactivated can be
connected to free plugs of the WIDE SCSI cable.
CYBERSTORM PPC
Ultra-Wide-SCSI
controller active
active terminated
terminated UW-SCSI-device
UW-SCSI-device UW-SCSI-devices or terminator
or terminator not terminiert
Operation with multiple internal Fast SCSI units
The CYBERSTORM PPC SCSI has to be connected to one of the middle plugs of the SCSI
cable. One physical end of the WIDE SCSI cable is connected to an active terminator pack.
The other end of the WIDE SCSI cable is connected to a Fast SCSI cable using an adaptor
WIDE->Fast. One of the Fast SCSI units needs to be connected with activated termination to
the other physical end of the Fast SCSI cable. Additional Fast SCSI units with termination
deactivated can be connected to free plugs of the Fast SCSI cable.
CYBERSTORM PPC
Ultra-Wide-SCSI
controller adaptor WIDE-
active to FAST-SCSI
terminator
active
terminated
Fast-SCSI-device Fast-SCSI-devices
not terminiert
Operation with internal Fast SCSI and WIDE SCSI units
The CYBERSTORM PPC SCSI has to be connected to one of the middle plugs of the SCSI
cable. The WIDE SCSI unit has to be connected at the plug at the end of the internal WIDE
SCSI cable with termination activated. Additional WIDE SCSI units with termination
deactivated can be connected to free plugs of the WIDE SCSI cable. The other end of the
WIDE SCSI cable is connected to a Fast SCSI cable using an adaptor WIDE->Fast. The
adaptor used needs to terminate
PowerUP - Amiga Goes PowerPC
http://powerup.amigaworld.de