Specifications

41
9. Re-mount the hard disk, complete with its attachment, by reversing the sequence in
which you have taken it out.
10. Finally you close the housing, fasten all screws, and re-connect all cables to the
computer in their prior positions. Now the installation is complete.
Figure 5.
The CYBERSTORM PPC
is ready installed.
ADVICE
Only if your AMIGA is furnished with the Kickstart Version 3.x, the
CYBERSTORM PPC is now immediately ready to use, and will place its
performance at your disposal immediately after the computer has been switched
on.
INSTALLATION OF THE CYBERSTORM PPC INTO AMIGA 4000T
For installation in an AMIGA 4000T, please read chapter "3.1 Internal Expansion Options" in
your AMIGA user manual first. There, the installation of a processor expansion module is
thoroughly explained. Please also refer to the chapter "Jumper on the main board of A4000T"
in your AMIGA user manual, and make sure that the jumpers J100 and J104 are in position
"EXTERNAL" or "E"!
ADVICE
In any case we strongly recommend to use the spacers supplied with the
delivery, which grant a troublefree, straight position of the CYBERSTORM PPC
within the AMIGA 4000T. (some AMIGA 4000T coming from the production of
Amiga Technologies were erroneously delivered with spacers that were too
long).
PowerUP - Amiga Goes PowerPC
http://powerup.amigaworld.de