Specifications

33
SYSTEM REQUIREMENTS
Minimum Configuration:
u
Amiga 3000(T)/Amiga 4000(T) or computer with compatible Processor slot
u
8 MByte on the CYBERSTORM PPC installed Fast RAM
u
Harddisk
u
Kickstart ROM Version 3.x
Recommended Configuration:
u
Amiga 3000(T)/Amiga 4000(T) or computer with compatible Processor slot
u
16 MByte or more on the CYBERSTORM PPC installed Fast RAM
u
Harddisk, CD ROM drive, Kickstart 3. 1
u
"CyberVision PPC" graphics board (available 4th quarter 1997)
READ BEFORE INSTALLlNG THE CYBERSTROM PPC
Before you begin with the installation of the CYBERSTORM PPC, you should first consider
the following items:
1. To function correctly, the CYBERSTORM PPC needs special 68k- and PowerPC-
specific software. This software has to be installed before the assembly of the
CYBERSTORM PPC. See also paragraph "Software installation".
2. If you want to install the CYBERSTORM PPC into an AMIGA 3000/3000(T), please
first read the paragraph "Jumper configurations in the AMIGA 3000/3000(T)" so
that you can carry out the correspondingly required jumper configurations on the
mother board of the AMIGA 3000/3000(T).
3. In order to operate the CYBERSTORM PPC a Kickstart-ROM Version 3.x must be
installed.
4. To expand your CYBERSTORM PPC with the for the operation of the board
necessary storage modules (SIMMs), please read chapter 2 first as it is easier to
install the SIMMs before installing the CYBERSTORM PPC in the computer.
PowerUP - Amiga Goes PowerPC
http://powerup.amigaworld.de