User manual

ManualsBrandsCyberView ManualsTVRP-F617TV

UM-CV-751-RP-F617TV-Q215V1 www.austin-hughes.com

751

User Manual

Designed and manufactured by Austin Hughes

dedicated KVM switch and rackmount screen technology

6U Rackmount Display Panel

w/ Digital TV

RP-F617TV

17” FHD 1080p LCD

Summary of content (32 pages)

PAGE 1
dedicated KVM switch and rackmount screen technology User Manual 17” FHD 1080p LCD RP-F617TV 6U Rackmount Display Panel w/ Digital TV 751 Designed and manufactured by Austin Hughes UM-CV-751-RP-F617TV-Q215V1 www.austin-hughes.
PAGE 2
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
PAGE 3
Contents < Part. 1 > RP-F617TV 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Installation P.1 P.1 - 2 P.3 < Part. 2 > LCD Specifications / OSD 2.1 2.2 Product Specifications On-screen Display Operation ( OSD ) P.4 - 5 P.6 < Part. 3 > Digital TV - Specifications / OSD 3.1 3.2 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.2.6 Remote Controller On-screen Display Operation ( OSD ) Channel Menu Picture Menu Audio Menu Time Menu Setup Menu Lock Menu UM-CV-751-RP-F617TV-Q215V1 P.7 - 8 P.9 - 10 P.11 - 14 P.
PAGE 4
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
PAGE 5
< Part 1 > < 1.1 > Package Content RP-F617TV RP-F617TV unit X 1 - 6ft VGA cable X 1 - Power adapter X 1 - Power cord X 1 < 1.2 > Structure Diagram Front view 2 1 3 Power adapter 4 Rear view 5 1 LCD panel 2 LCD membrane 3 Audio speaker 4 Remote sensor 5 Power adapter basket Power cord HDMI VGA Audio in ( PC ) RCA TV Audio Firmware out Basic I/O : HDMI + VGA + Composite + Audio + TV w/ Remote Controller UM-CV-751-RP-F617TV-Q215V1 P.1 www.austin-hughes.
PAGE 6
< 1.2 > Dimension Front View Side View UNIT : mm Bottom View 1mm = 0.03937 inch Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RP-F617TV 480 x 48 x 266 mm 18.9 x 1.9 x 10.5 inch 529 x 124 x 451 mm 20.8 x 4.9 x 17.8 inch 4.5 kg 9.9 lbs 6 kg 13.2 lbs UM-CV-751-RP-F617TV-Q215V1 P.2 www.austin-hughes.
PAGE 7
< 1.3 > Installation RP-F617TV Step ■ ■ 1 Mount the display panel with M6 screw set. M6 screw x 4 pcs required ( Left & right side ). M6 screw sets are not provided. Step ■ UM-CV-751-RP-F617TV-Q215V1 P.3 2 Fix the LCD into the rack. www.austin-hughes.
PAGE 8
< Part 2 > < 2.1 > Product Specifications LCD Panel Panel Size ( diagonal ) 17.3-inch Widescreen TFT color LCD Display pixel ( dots x lines ) 1920 x 1080 Brightness ( typ. ) 400 Contrast Ratio ( typ. ) 600:1 Color 16.7 M, 8-bit Viewing Angle ( L/R/U/D ) 80/80/60/80 Response Time ( ms ) 40 Dot pitch ( mm ) 0.1989 Display Area ( mm ) 381.888H x 214.
PAGE 9
RP-F617TV Environmental Conditions Operating Storage Physical Specification Temperature 0 to 55°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Product ( W x D x H ) 480 x 48 x 266 mm 18.9 x 1.9 x 10.5 inch Packing ( W x D x H ) 529 x 124 x 451 mm 20.8 x 4.9 x 17.8 inch Applicable Format Net Weight 4.5 kgs / 9.9 lbs Gross Weight 6 kgs / 13.
PAGE 10
< 2.2 > On-screen Display Operation ( OSD ) Membrane Switch Function Turn the monitor on or off Display the OSD menu Act as an Enter key to select screen setting options Scroll through menu options and adjust the displayed control Exit the OSD screen Go back to the previous on-screen sub-menu or main menu Remark : All LED touch buttons in WHITE light. The LED of Power touch button will flash continuously when there is no signal input.
PAGE 11
< Part 3 > Digital TV - ATSC < 3.1 > Remote Controller RP-F617TV 1 11 2 1 12 1 13 1 14 1 15 3 1 16 4 1 17 5 1 18 6 1 19 7 8 9 10 2 20 21 2 29 22 30 23 24 25 27 31 32 33 34 28 35 26 UM-CV-751-RP-F617TV-Q215V1 P.7 www.austin-hughes.
PAGE 12
MUTE 0-9 -/-- Mute or restore sound 4 RED / GREEN / YELLOW / CYAN COLOR keys.
PAGE 13
< 3.2 > On-screen Display Operation ( OSD ) RP-F617TV Press MENU key to display menu or close the current menu and open the previous menu. And press LEFT / RIGHT to select sub menu. Press ENTER key to sub menu. < 3.2.1 > Channel Menu The Channel menu is available only in ATV and DTV source, followed by the CHANNEL MENU, Air/Cable, Auto Scan, Favorite, Show / Hide and DTV Signal are the items, which can be selected by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items.
PAGE 14
< 3.2.1.1 > Auto Scan Menu Press ENTER key to enter the submenu, press LEFT / RIGHT keys to select yes or no. If you choose yes, then you can start the automatic tuning process. Press MENU key to stop the process. After a few minutes the tuning will finish and the first station stored will show on the TV screen. Change channels by pressing UP / DOWN keys. < 3.2.1.2 > Favorite Menu ■ Press UP / DOWN keys to choose the channel which you want to select.
PAGE 15
RP-F617TV < 3.2.2 > Picture Menu Enter Picture Menu, you can select Picture Mode, Color Mode, Zoom Mode, 3DNR, Backlight, DLC and Color Range items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.2.1 > Picture Mode Menu ■ Press LEFT / RIGHT keys to select the picture mode.
PAGE 16
< 3.2.2.2 > Color Mode Menu ■ Press LEFT / RIGHT keys to select the picture mode. If [User] is selected, adjust the items below. ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.2.3 > Zoom Mode Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu.
PAGE 17
RP-F617TV < 3.2.2.4 > Backlight Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.2.5 > 3DNR Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-CV-751-RP-F617TV-Q215V1 P.13 www.austin-hughes.
PAGE 18
< 3.2.2.6 > Advanced Menu ■ Press ENTER key to enter the Advanced menu if you are in VGA source. ■ Press ▲/▼ keys to select different setting. ■ Use ◄/► keys to adjust the horizontal position of the window. ■ Use ◄/► keys to adjust the vertical position of the window. ■ Use ◄/► keys to adjust the clock of the window. ■ Use ◄/► keys to adjust the phase of the window. ■ Press ENTER key for a moment to restore the window. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu.
PAGE 19
RP-F617TV < 3.2.3 > Audio Menu Enter Audio menu, you can select Equalizer Standard, MTS, Audio Language, SPDIF Type, Surround Sound, Audio Only and AVC items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.3.1 > Equalizer Menu ■ Press LEFT / RIGHT keys to select the picture mode.
PAGE 20
< 3.2.3.2 > MTS Menu ( only in ATV ) ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.3.3 > Audio Language Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-CV-751-RP-F617TV-Q215V1 P.16 www.austin-hughes.
PAGE 21
RP-F617TV < 3.2.4 > Timer Menu Enter Time menu, you can select Sleep Timer, Time Zone, DST, Time Format, Auto Sync, Clock, Wake Up, 3D Type 2D, 3D Detect and 3D_LR items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.4.1 > Sleep Timer Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set.
PAGE 22
< 3.2.4.2 > Time Zone Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.4.3 > Clock Menu ( only when Auto Sync is off ) ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-CV-751-RP-F617TV-Q215V1 P.18 www.austin-hughes.
PAGE 23
RP-F617TV < 3.2.4.4 > Wake Up Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.4.5 > 3D Type Menu ( for 3D panel ) ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-CV-751-RP-F617TV-Q215V1 P.19 www.austin-hughes.
PAGE 24
< 3.2.5 > Setup Menu Enter Setup menu, you can select Menu Language, Transparent, OSD Time Out, Closed Caption, Restore Default, Setup Wizard, Software Update (USB) and CEC items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.5.1 > Menu Language Menu ■ Press UP / DOWN keys to select different setting.
PAGE 25
RP-F617TV < 3.2.5.2 > Transparent Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.5.3 > OSD Time Out Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-CV-751-RP-F617TV-Q215V1 P.21 www.austin-hughes.
PAGE 26
< 3.2.5.4 > Closed Caption Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press ENTER key to enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.5.4.1 > Option Menu ■ Press LEFT / RIGHT keys to select the option mode. If [User] is selected, adjust the items below. ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value.
PAGE 27
RP-F617TV < 3.2.5.5 > Restore Default Menu ■ Press ENTER key to enter the restore menu. ■ Press LEFT / RIGHT keys to select yes or no. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.5.6 > Setup Wizard Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press ENTER key to go to next step. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-CV-751-RP-F617TV-Q215V1 P.
PAGE 28
< 3.2.5.7 > Software Update ( USB ) Menu ■ Press ENTER key to enter the restore menu. ■ Press LEFT / RIGHT keys to select yes or no. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.5.8 > CEC Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press ENTER key to enter the sub-menu or set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu.
PAGE 29
RP-F617TV < 3.2.6 > Lock Menu Followed by the Lock Menu, Enter Password, Change Password, System Lock, Input Block, US, Canada, RRT Setting and Reset RRT are the items, which can be selected by pressing UP / DOWN keys. RRT Setting and Reset RRT are only available in DTV when the program has RRT. And the RRT Setting menu is change with the DTV program. You should Reset RRT before you operate the RRT Setting menu. The operation is same with the US menu etc. ■ Press the Numeric keys to enter password.
PAGE 30
< 3.2.6.1 > Change Password Menu ■ To change password, you need to enter the old password. After enter old password, you can enter the new password and confirm password, which consists of only digits. The new password and Confirm password must be same. If the new password and confirm password are different, unmatched is displayed to indicate that new password is invalid. ■ Press VOL- key to clear and press VOL+ key to cancel the menu. ■ Press MENU key to return the previous menu.
PAGE 31
RP-F617TV < 3.2.6.3.1 > TV Rating Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.6.3.2 > MPAA Menu ■ Press UP / DOWN and LEFT / RIGHT keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.6.4 > Canada Menu ■ Press UP / DOWN keys to select different setting.
PAGE 32
< 3.2.6.4.1 > Canada EngMenu ■ Press UP / DOWN and LEFT / RIGHT keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 3.2.6.4.2 > Canada Fre Menu ■ Press UP / DOWN and LEFT / RIGHT keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu.