User manual

User Manual

8.10 To reset the KVM to default ROM setting

Simply press the Scroll on your keyboard twice in succession followed by the R on your keyboard

(note -: THIS DOES NOT RESET THE PASSWORD)

8.11 To identify an active channel

Simply look for the ☼ symbol on the on screen display next to the channel designation

8.12 To assign a channel a name designation

Simply select the KVM OSD, see section 8.0 of this user manual, use the Tab key on your keyboard

to select the default channel designation (e.g. SYSTEM 01) and press the INS key on your keyboard

to edit the channel name designation, press ENTER on your keyboard when complete

Note -: the channel name designation should not exceed 8 characters

8.13 To find a channel by its name designation

Simply press the Scroll on your keyboard twice in succession followed by the F on your keyboard,

type the channel name, see section *** of this user manual, press enter on your keyboard – the unit

will begin searching from channel 1

www.austin-hughes.co.uk

Page