CyberView User Manual RKP215-801 RKP217-801 RKP215-1601 RKP217-1601 2U Rackmount LCD monitor Keyboard drawer with KVM switch Version 2.
User Manual Table of Contents 1.0 General............................................................................................................ 3 1.1 Unit Introduction........................................................................................... 3 1.2 Unit Photograph............................................................................................ 3 1.3 Unit Features ................................................................................................ 3 1.
User Manual 1.0 1.1 General Unit Introduction Thank you for purchasing the 2U Rackmount LCD monitor keyboard drawer with KVM switch. The unit is a unique combined 19” rack mountable unit designed to provide access to and control of multiple servers from a single unit.
User Manual 1.5 • • • • • • • • • • • • 1.
User Manual 2. LCD On Screen Display 2.1 Display & Navigation Using Membrane Keys The On screen display built into the unit provides users with an efficient method of adjusting to the display input signal. This section explains clearly how to navigate the OSD using the membrane keys, shown below, that you will find on the unit to the right side of the LCD screen. 2.1.
User Manual 2.1.2 To Select a Menu Item Simply press the key to scroll 2.1.3 To Enter the Sub Menu Simply press the key marked 2.1.4 To Change an Input Value Simply use the key marked 2.1.5 To Save the setting Simply press the key marked 2.1.6 To Exit the Main Menu Simply use the key marked 2.2 2.2.1 Customizing the LCD Settings Brightness / Contrast To adjust brightness - follow steps 2.1.1 through 2.1.5 2.2.2 Auto Adjust To auto adjust - follow steps 2.1.1 through 2.1.
User Manual 2.2.3 Phase / Clock To optimize display qualities - follow the steps 2.1.1 through 2.1.5 2.2.4 Horizontal Screen Position To adjust horizontal screen position - follow the steps 2.1.1 through 2.1.5 2.2.5 Vertical Screen Position To adjust horizontal screen position - follow the steps 2.1.1 through 2.1.5 2.2.6 To reset to default factory setting To reset - follow the steps 2.1.1 through 2.1.5 3. Miscellaneous Sub Menu To select miscellaneous sub menu - follow the steps 2.1.
User Manual 3.1.1 Information To select information sub menu - follow the steps 2.1.1 through 2.1.5 3.1.2 OSD Timeout To select OSD Timeout sub menu - follow the steps 2.1.1 through 2.1.5 3.1.3 Color To select Color sub menu - follow the steps 2.1.1 through 2.1.5 www.austin-hughes.co.
User Manual 3.1.4 OSD language To select the OSD language sub menu - follow the steps 2.1.1 through 2.1.5 4. Setting OS Refresh Rate - Microsoft Windows® On the windows desktop ‘right click’ the mouse key and then select ‘properties’ Select ‘Settings’ from the tab menu Select ‘Monitor’ and then select a Screen refresh Rate of 75 Hertz – Press OK to save and exit www.austin-hughes.co.
User Manual 5. Connecting Your KVM Switch 12V DC Power In KVM Channel Ports Cascade Port Consol Port • • • KVM Channel Port – to connect servers using 3 in 1 KVM cable Cascade Port – to connect to another KVM switch Consol Port – to be connected to previous bank (if exists) Cascade port 6. Cascading KVM Switches Using 3 in 1 KVM cable connect from Bank 1’s “Cascade port” to Bank 2’s “Console port”.
User Manual Note – the maximum recommended distance between the KVM port and the server is 15ft, use Austin Hughes standard 3 in 1 KVM cable part number CD15 shown below. To cascade between switches use Austin Hughes standard cable CA15 the CA 15 cable has 2 x PS2 connections at both the ends of the cable. 7. KVM Navigation Using Membrane Keys Membrane Keys built into the unit provide users an efficient method of changing KVM ports very quickly and accurately.
User Manual This LED box displays the Bank Select Bank Button 1 - 8 8. KVM Navigation using On Screen Display & Hot keys Hold down the FN key and press Scroll on your keyboard twice in succession - the OSD will be displayed for 10 Sec; this can be prolonged to 99 Sec 8.
User Manual The Unit default setting is Consul OFF – the user must key in the current password to operate the unit 8.3 To reset the KVM to default setting using the membrane keys Simply press the 8.4 and channel buttons together To select the previous channel Simply press the Scroll on your keyboard twice in succession followed by the 8.
User Manual 8.10 To reset the KVM to default ROM setting Simply press the Scroll on your keyboard twice in succession followed by the R on your keyboard (note -: THIS DOES NOT RESET THE PASSWORD) 8.11 To identify an active channel Simply look for the ☼ symbol on the on screen display next to the channel designation 8.12 To assign a channel a name designation Simply select the KVM OSD, see section 8.0 of this user manual, use the Tab key on your keyboard to select the default channel designation (e.
User Manual 9. LCD Technical Specification LCD Video Size 15" Screen Area TFT Active Matrix Display Area 304.1mm (h) x 228.1mm (V) Contrast Ratio 300:1 Viewing Angle 130 deg (H) z 115 deg (V) TYP Resolution 1024 x 768 XGA Pixel Pitch 0.297mm (H) x 0.297mm (W) Response Time Tr = 5ms, TF = 20ms TYP Brightness 250 cd/m2 Panel Color 16.2M Colors Back Light 4 Lamps Synchronization Horizontal 48.36-60 KHz Range Vertical 56-75 Hz Input Signal Analog RGB 0.7Vp-p Power Management www.
User Manual LCD Video Size 17" Screen Area TFT Active Matrix Display Area 337:92mm (h) x 270.336mm (V) Contrast Ratio 350:1 Viewing Angle 150 deg (H) z 125 deg (V) TYP Resolution 1280 x 1024 SXGA Pixel Pitch 0.264mm (H) x 0.264mm (W) Response Time Tr = 5ms, TF = 20ms TYP Brightness 250 cd/m2 Panel Color 16.7M Colors Back Light 4 Lamps Synchronization Horizontal 31-69 KHz Range Vertical 56-75 Hz Input Signal Analog RGB 0.
User Manual 10.
User Manual 11. LCD Troubleshooting 11.1 The LCD does not function, the PC input is operational • Ensure that the Power adaptor is securely plugged in at both ends and has power feed from the supply source; check that the Green led light is on on the adaptor unit • Ensure the LCD is on by pressing the key • Ensure that the LCD is pulled out past the micro switch threshold 11.2 • The VGA cable input cable is not connected properly 11.3 • 12.
User Manual 13. Warranty 13.1 Period & Conditions Warranty is from the date of sale of the unit, subject to the terms and conditions of the Austin Hughes Europe Authorised channel partner who supplied the unit, please refer to your authorised channel partner for terms & conditions 13.2 Manufacturers exclusions 13.2.1 Any Unit on which the Austin Hughes serial number has been defaced, modified or removed 13.2.
