dedicated KVM switch and rackmount screen technology User Manual CV-S101 Combo KVM Extender 751 Designed and manufactured by Austin Hughes UM-CV-751-CV-S101-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part. 1 > CV-S101 1.1 1.2 1.3 Package Contents Transmitter Receiver P.1 P.2 P.3 < Part. 2 > Application 2.1 2.2 2.3 Extending the KVM console port to 150 meters Extending the computer to KVM port to 150 meters Extending the computer up to 150 meters < Part. 3 > Keyboard Hotkey Command UM-CV-751-CV-S101-Q215V1 P.4 P.5 P.6 P.7 www.austin-hughes.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately. < Part 1 > CV-S101 < 1.
< 1.
< 1.
CV-S101 < Part 2 > Application < 2.1 > Extending the KVM console port to 150 meters USB Console KVM switch 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 Monitor CE-6 combo KVM cable Transmitter Transmitter Front Rear Cat6 cable up to 150 meters Monitor CE-6 6ft combo KVM cable Front Receiver Rear UM-CV-751-CV-S101-Q215V1 P.4 www.austin-hughes.
CV-S101 < 2.2 > Extending the computer to KVM port to 150 meters Cat6 KVM port Cat5/6 dongle 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 USB KB Mouse OR Rear Receiver VGA Front DB-15 KVM port 8 7 6 5 4 3 2 1 Cat6 cable up to 150 meters Monitor CE-6 6ft combo KVM cable Front Transmitter Rear UM-CV-751-CV-S101-Q215V1 P.5 www.austin-hughes.
< 2.3 > Extending the computer up to 150 meters CV-S101 Monitor CE-6 6ft combo KVM cable Front Rear Transmitter Cat6 cable up to 150m Monitor CE-6 6ft combo KVM cable Receiver Front UM-CV-751-CV-S101-Q215V1 Rear P.6 www.austin-hughes.
CV-S101 < Part 3 > Keyboard Hotkey Command You can switch the Receiver from “Local Host” port to “RJ-45” port and vice-versa through simple key sequences made by the remote console side. To send commands to the Receiver, you must press the hotkey (default is Scroll Lock) twice within 2 seconds. You will hear a beep sound confirming you are in the hotkey mode. If you do not press any key during hotkey mode over 2 seconds the hotkey mode will be terminated and back to normal state.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved. UM-CV-751-CV-S101-Q215V1 www.austin-hughes.
