User manual

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007
Commercial-in-Confidence Page 33 of 43
Appendix B. Barcode Default Resets
Note:
The following barcode sequences reset the default Cyberview-supported
configuration. Contact Cyberview for non-default configuration reset codes.
6 LED Barcode Readers
The following procedure is only for barcode readers that have 6 LED lights, other readers have only
two.
Whenever the barcode reader fails to decode receipt slips, scan the four special barcodes hereunder
in top to bottom order.
Start
500ms
Momentary
End
The Reset to Default procedure will very rarely be required in the event that an internal data
corruption has occurred following a power malfunction.
Other Readers
The following procedure is only for barcode readers with 2 LED lights.